Help Fuel Leak
Help Fuel Leak
Author
Discussion

Geo28

Original Poster:

262 posts

248 months

Wednesday 30th June 2010
quotequote all
My first real issue after 4.5 years of ownership frown I've found petrol soaked carpet in the boot of the car passenger side.

Any ideas where it's coming from? Can I fix it myself? Not really enthusiastic about driving it to the garage frown

TJC46

2,199 posts

237 months

Wednesday 30th June 2010
quotequote all
The petrol tank outlet to the fuel pump is on the bottom of the tank, passenger side.within the boot itself. There is a small length of petrol hose attached by a jubilee clip to this outlet.It runs thru a hole in the fibreglass [all sealed by sikaflex] to the petrol pump.Any leak at this outlet,will result in petrol in the boot.it has nowhere else to go. Its probabaly best to drain and remove the tank to find out exactly where its leaking,

Geo28

Original Poster:

262 posts

248 months

Wednesday 30th June 2010
quotequote all
Is this an easy job to do? Or is it best left to the professionals? I have the Bible for reference and am aware of the dangers of petrol and it's fumes. My only worry is starting a job I can't finish.

sapper

1,134 posts

236 months

Thursday 1st July 2010
quotequote all
I would think best case scenario is a perished fule pipe/hose, either supply to the pump or the return hose. which will be an easy fix. worst case is a leaking tank, which can be easily repaired by a half decent welder.
But if your not comfortable doing it get Boddie & Doyle in.

phillpot

17,525 posts

214 months

Thursday 1st July 2010
quotequote all
sapper said:
a leaking tank, which can be easily repaired by a half decent welder.
With a death wish yikes NEVER EVER WELD A USED PETROL TANK no matter how many times its been flushed out(imho)

tvrman

359 posts

315 months

Thursday 1st July 2010
quotequote all
Reminds me of a story about a 924 owner with a leaky tank. Replacement tank was about £600. Luckily he found a company doing very strong glue which was suitable for the fix. Cost around £100; good value compared to the cost of a new tank. The glue company even came along to the garage and helped him with the fix.

Ian

sapper

1,134 posts

236 months

Thursday 1st July 2010
quotequote all
phillpot said:
sapper said:
a leaking tank, which can be easily repaired by a half decent welder.
With a death wish yikes NEVER EVER WELD A USED PETROL TANK no matter how many times its been flushed out(imho)
SSHHHHH dont shout... As i said, worst case is a leaking tank, It could be repaired by welding,with the correct precautions taken by a welder without a death wish.




TJC46

2,199 posts

237 months

Thursday 1st July 2010
quotequote all
Geo28 said:
Is this an easy job to do? Or is it best left to the professionals? I have the Bible for reference and am aware of the dangers of petrol and it's fumes. My only worry is starting a job I can't finish.
Its not to difficult. I woud first drain the tank by removing the hose from the inlet side of the pump, you then need to remove all of the sealant where this hose goes thru the fibreglass into the boot. I think there is 4 bolts that hold the tank in place. [check in your bible] You need to undoe the jubilee clips on the filler hose, this can be wiggled off later. Once the tank is loose you can pull the bottom towards you and now try and remove the filler hose. Once this is removed you can tilt the top backwards slightly to enable you to undoe the vent hose and the fuel return hose. and any electrical connections. You should now be able to lift the tank out of the boot.[I think thats everything, but check in the bible] My tank was aluminium, so no corrosion problems, but the outlet connection had no lip or swage on it to help grip the petrol hose in place, it was all smooth[ another poor design by TVR im afraid. Hope this helps. p.s i personally would not risk driving your car anywhere, if the petrol does find a way out of the boot, you have 2 hot exhaust pipes directly below.

Geo28

Original Poster:

262 posts

248 months

Friday 2nd July 2010
quotequote all
Thanks for all the advice. I am going to give this a go this weekend. At the very least I can empty the tank and stop the leak.

I won't be driving it as petrol has already found a way out. Underneath the carpet there is a breather hole which takes the fuel close enough to the exhaust.

I'm just gutted that there is almost a full tank of fuel. My wife is looking forward to getting free petrol for her car.

Geo28

Original Poster:

262 posts

248 months

Saturday 3rd July 2010
quotequote all
Finally tank emptied and removed. Found a suspect pipe running to the fuel pump which needs replacing.

This was not the cause of the leak. The tank has a small hole on the bottom corner.

So what are the options ? Can it be repaired? I have seen a kit on frosts, has anyone used this.

If not where can I get hold of a new tank. ?

Thanks for all the help so far. Your advice has already been a great help.

TJC46

2,199 posts

237 months

Saturday 3rd July 2010
quotequote all
Google "welding aluminium fuel tanks" There is some interesting reading on the subject. Yes it can be done, so there must be a fabrication company somewhere that could weld a repair. There is lots of companys making aluminium tanks for motor bikes, kit cars, boats etc. Post up how you get on with it, and good luck. I do hope your tank is aluminium or this post is a load of waffle.biglaugh

Geo28

Original Poster:

262 posts

248 months

Saturday 3rd July 2010
quotequote all
It is an aluminium tank. Will post a pic of the hole when I have chance.

By the way I noticed the hose from the tank to fuel pump is a larger diameter than the other hoses. Any ideas what diameter it is.

BliarOut

72,863 posts

270 months

Sunday 4th July 2010
quotequote all
REPLACE BOTH THE FLEXIBLE LINES IN THE ENGINE BAY. Sorry for shouting, but however bad the cool area ones are the ones in the engine bay will be far worse due to the heat!

Geo28

Original Poster:

262 posts

248 months

Sunday 4th July 2010
quotequote all
Yes I will be doing these while the tank is out. Makes sense to do them now when there is no fuel in.

Geo28

Original Poster:

262 posts

248 months

Tuesday 6th July 2010
quotequote all
Ok so here's what I found;

I have found a specialist welder capable of repairing the hole safely.

I am then going to protect the exterior using por 15

I am also thinking about using the por 15 fuel tank repair kit to treat and protect the interior.

After all this I should have a tank which will last and be in better condition than second hand tank for less money.

Geo28

Original Poster:

262 posts

248 months

Friday 23rd July 2010
quotequote all
Woohoo fuel tank just come back from welder all nicely sealed !! Only cost £90 far better than cost of a new tank ! Just need to dry it out has it's been filled with water to check for leaks.

I'm going to paint with por15 for extra protection and replace the fuel hoses whilst I'm at it.

I've saved myself a fortune doing this myself. Would never attempted this in a million years without the help of this site.

dxg

10,842 posts

291 months

Friday 20th August 2010
quotequote all
sapper said:
phillpot said:
sapper said:
a leaking tank, which can be easily repaired by a half decent welder.
With a death wish yikes NEVER EVER WELD A USED PETROL TANK no matter how many times its been flushed out(imho)
SSHHHHH dont shout... As i said, worst case is a leaking tank, It could be repaired by welding,with the correct precautions taken by a welder without a death wish.
Well...
http://www.youtube.com/watch?v=b6eEWZdWnPU
http://www.youtube.com/watch?v=hKT-yGCFU5A