Oh feck
Author
Discussion

Ant.

Original Poster:

5,254 posts

310 months

Saturday 3rd July 2010
quotequote all
It seems my engine didn't want to have a 72mm plenum fitted and then be set up on the rolling road last Thursday.

Neither does it seem, to want to go to the Growl....



Therefore, it is now sitting on my garage floor awaiting strip down.



What does everyone reckon a 120D sport will make on the RR at the Growl?????

Wildfire

9,948 posts

281 months

Saturday 3rd July 2010
quotequote all
What happened?

Ant.

Original Poster:

5,254 posts

310 months

Saturday 3rd July 2010
quotequote all
At the moment ,I have to pass on that.

All the mains and big ends look ok,but there is a knock.

Onwards and upwards,its only an engine after all.

LordGrover

34,164 posts

241 months

Saturday 3rd July 2010
quotequote all
Ouch! Not good mate.
Maybe a beer or three at the Growl will help? I may even get you a half. beer

Here's hoping it's nothing too serious. Fingers crossed and all that...

Ant.

Original Poster:

5,254 posts

310 months

Saturday 3rd July 2010
quotequote all
LordGrover said:
Ouch! Not good mate.
Maybe a beer or three at the Growl will help? I may even get you a half. beer

Here's hoping it's nothing too serious. Fingers crossed and all that...
Always accepting of beer mate!!!!!


I am kind of expecting the bad , so at least it wont hurt the brain too much!!!

clive f

7,259 posts

262 months

Saturday 3rd July 2010
quotequote all
not good news mate, but hopefully after some investigation it could turn out to be something not major serious?

Pupp

12,948 posts

301 months

Saturday 3rd July 2010
quotequote all
If the ends and mains are good, then odds on it's your cam. Back together in a week if you talk nicely to Rob! smile

Ant.

Original Poster:

5,254 posts

310 months

Saturday 3rd July 2010
quotequote all
Pupp said:
If the ends and mains are good, then odds on it's your cam. Back together in a week if you talk nicely to Rob! smile
Hmmm, a knock at the cam? Its not a tap, and would a cam come on suddenly?

I drove from Stoke to Kegworth Thursday morning and it was fine when I arrived, then carried onto to Sheffield and by the time I got off at Jct31, there was a knock...

Pupp

12,948 posts

301 months

Saturday 3rd July 2010
quotequote all
Ant. said:
Pupp said:
If the ends and mains are good, then odds on it's your cam. Back together in a week if you talk nicely to Rob! smile
Hmmm, a knock at the cam? Its not a tap, and would a cam come on suddenly?

I drove from Stoke to Kegworth Thursday morning and it was fine when I arrived, then carried onto to Sheffield and by the time I got off at Jct31, there was a knock...
Yep. Been there and got two T-shirts. Get that valley open smile

Worth being alive to little ends 'though, they can knock too

Barreti

6,689 posts

266 months

Sunday 4th July 2010
quotequote all
Crappy news I'm really sorry to hear Ant.

It sounded fantastic when I last heard it roaring up the road back towards the M1. I hope its nothing serious and you get it sorted quickly.

Best of luck.

Slacey

1,113 posts

243 months

Sunday 4th July 2010
quotequote all
Oh bugger. Had you used it much since Curborough? That oil leak of mine ended up being the contents of the gearbox! Fortunately it was just the tail seal on the 'box and the short drive home meant it didn't run dry. Hopefully you'll have a similar simple fix!

Ant.

Original Poster:

5,254 posts

310 months

Sunday 4th July 2010
quotequote all
Slacey said:
Oh bugger. Had you used it much since Curborough? That oil leak of mine ended up being the contents of the gearbox! Fortunately it was just the tail seal on the 'box and the short drive home meant it didn't run dry. Hopefully you'll have a similar simple fix!
It had been used since Curborough, no problems at all.

Pasco

6,652 posts

257 months

Monday 5th July 2010
quotequote all
Hows it going Ant any ideas yet mate ?

Ant.

Original Poster:

5,254 posts

310 months

Wednesday 7th July 2010
quotequote all
Just got back from Coventry, block heated up and no3 lifted straight out !!! All the others would not move....

Johno

8,593 posts

311 months

Wednesday 7th July 2010
quotequote all
I'm presuning slipped liner by that comment and I though you'd top hatted it ?

Ant.

Original Poster:

5,254 posts

310 months

Wednesday 7th July 2010
quotequote all
My original plan was to TH a block, but this one turned up as a good , built engine.

Being Top hatted now.

Johno

8,593 posts

311 months

Wednesday 7th July 2010
quotequote all
Unlucky fella frown

Is the head alright and other internals?

Ant.

Original Poster:

5,254 posts

310 months

Wednesday 7th July 2010
quotequote all
Johno said:
Unlucky fella frown

Is the head alright and other internals?
Heads look fine, to my knowledge the engine never overheated, just developed the knock.

The pistons/rods and crank are like new, no st on them at all...

Johno

8,593 posts

311 months

Wednesday 7th July 2010
quotequote all
I've heard a slipped liner block and it's the knock off the liner against the head that would of been my only concern.

Great news the rest is OK, it'll go back together really quick then wink

Ant.

Original Poster:

5,254 posts

310 months

Wednesday 7th July 2010
quotequote all
Johno said:
I've heard a slipped liner block and it's the knock off the liner against the head that would of been my only concern.

Great news the rest is OK, it'll go back together really quick then wink
It should go back together nicely, only problem is I have to go and lay on a beach in Skiathos for a week before the Growl!!!!