Rear Diff Queries
Rear Diff Queries
Author
Discussion

vroom

Original Poster:

665 posts

313 months

Monday 15th March 2004
quotequote all
Morning all,

Can anyone offer any advice on the following:-

My 95 Chim, develops a very slight vibration when I pull off. Only occurs when the diff is really hot (e.g. after a motorway blast) and only if I pull off gently. The sensation is though I'm driving over very rough tarmack, like Shell Grip or something.

Is this normal as I had the same sensation with my previous Chim?

Cheers,

Nick.

>>> Edited by vroom on Wednesday 28th July 11:22

trefor

14,780 posts

312 months

Monday 15th March 2004
quotequote all
Mine Chimaera did the same - it was the crown wheel and pinion not mating very well. It only happened after a good trashing so the diff got nice and hot. Needed a replacement CW&P (= full diff rebuild).

Hope this is not the case with yours and it's something simple.

zumbruk

7,848 posts

289 months

Monday 15th March 2004
quotequote all
Who has a Chimaera with a *front* diff, anyway?

vroom

Original Poster:

665 posts

313 months

Monday 15th March 2004
quotequote all
Thanks Guys,

Its done 64K, so should be well worn.

Trefor, hope you don't mind me asking, but what sort of cost was the rebuild??

Nick.

trefor

14,780 posts

312 months

Monday 15th March 2004
quotequote all
Mine was in 2 stages - they rebuilt the bearings, put it back in and the whine had gone but the juddering was still there. 2nd rebuild fixed it for good. Not before I'd needlessly changed the propshaft UJS to pacify the rebuilder it wasn't that. My costs were a little hard to work out, but I think the rebuild was something like 500 pounds, a CW&P may be hard to find as I suspect you have the early diff like mine had.

I suggest speaking to a specialist as I could be talking out of my RS. www.gearboxman.com is a good place.

T/.

dannyboyo

2,392 posts

308 months

Monday 15th March 2004
quotequote all
Mine did something like this last year, only did it when I pulled off in anything but a dead straight line.

Can't remember what exactly it was, I have had the diff bearings and collor replaced previously, and it was after that when the problem seemed to develop. I think it turned out to be a worn UJ, although there was talk that they just put the wrong diff oil in, but I don't think the garage let me in on the whole story. I took it their one day, they said they just replaced the diff oil, and it came back fixed!!

I had so many problems with that whole back end I've forgotten what fixed what to tell the truth!! It's OK now though

vroom

Original Poster:

665 posts

313 months

Monday 15th March 2004
quotequote all
Thanks for the info.

There's no whine so I suspect the bearings are OK.

The vibration on take off is very minor, so I'll just keep an eye on it at this stage.

And I don't use reverse very often!

Nick.