POR15 - 3 years on

[dnb]

I had to replace a steering UJ for the MOT today. I took the opportunity to examine the paintwork from when I did the body off restoration in 2006/7

I think the following picture speaks for itself. (You should only look at the clean bits!)

[slideways]

Well it looks like it speaks for it's self did you spray it on on apply it by hand?

[Simon says]

It's blinding stuff if used correctly mines still firmly attached 3 years + must admit I prepared well but then just slapped on two coats,bits I couldn't coat I dinotroled that's very mucky though now(not like your pics)beats rotten outriggers though.

Edited by Simon says on Monday 19th July 22:14

[Simon says]

It's blinding stuff if used correctly mines still firmly attached 3 years + must admit I prepared well but then just slapped on two coats,bits I couldn't coat I dinotroled that's very mucky though now(not like your pics)beats rotten outriggers though.

Edited by Simon says on Wednesday 21st July 16:10

[dnb]

It was brush painted, but I used foam varnish brushes. It got 6 coats plus the triggers got coated in epoxy pitch as well... Great stuff, but quite expensive for an underseal.

Shame the bodywork looks as scruffy as it does, but that goes with the 100k+ miles on the clock.

Edited by dnb on Monday 19th July 23:16