Discussion
Factory settings copied from anthor thread on here: These are circa 2006 though some feel the rear toe in is excessive and could be wound back to ~2.0mm in
Chassis Settings
K.P.I 5°
Castor 4 - 5°
Front Camber 0.5°-0.75° Negative
Front Toe 0-10”(0-1.5mm)IN
Rear Camber 1.25° Negative
Rear Toe 22”(3.0mm)IN
Chassis Settings
K.P.I 5°
Castor 4 - 5°
Front Camber 0.5°-0.75° Negative
Front Toe 0-10”(0-1.5mm)IN
Rear Camber 1.25° Negative
Rear Toe 22”(3.0mm)IN
Gassing Station | Tamora, T350 & Sagaris | Top of Page | What's New | My Stuff