Tempted by a A6 2.7T
Author
Discussion

anonymous-user

Original Poster:

85 months

Sunday 25th July 2010
quotequote all
What are these like then?

I'm extremely tempted by one, seems like the idea base to build a cheap, powerful, comfortable understated car. Same engine as the B5 S4, right?

What are they like to drive? Any good on track?

I do like my Soarer and am thinking about modifying that, but I can't help but think the A6 would be a better base

blueg33

46,943 posts

255 months

Sunday 25th July 2010
quotequote all
Simps said:
What are these like then?

I'm extremely tempted by one, seems like the idea base to build a cheap, powerful, comfortable understated car. Same engine as the B5 S4, right?

What are they like to drive? Any good on track?

I do like my Soarer and am thinking about modifying that, but I can't help but think the A6 would be a better base
I wouldn't call it a track car! far too big and lardy! Handling and particularly the steering is just too vague. (I like them so don't get me wrong....but on a track....nooooo)

anonymous-user

Original Poster:

85 months

Sunday 25th July 2010
quotequote all
It would be far from a hardcore track slag, but I would throw it on the Occasional track day just to have a bit of fun.

I think I just want something that is mentally quick, yet comfortable and understated, and the A6 ticks these boxes remarkably well - From what I'm reading, the powerplant can make some silly horsepower without breaking a sweat?

PLUS the fact that I'm going to have free access to VAS machines, ELSA and everything else you'd expect from a Audi Service centre making an Audi make lots more sense.

I'm at a cross roads - Do I stick with the Soarer and modify that, a car I've wanted for years but am already a little bit bored of, or chop it in for a A6, something much newer, much larger, more comfortable and seemingly needs less work for getting big horsepower numbers?

They seem like immense amounts of car for the money!

Dr G

16,006 posts

273 months

Sunday 25th July 2010
quotequote all
That's not a half bad idea! A manual saloon is worth approximately two tenths of naff all.

Tuning the 2.7 TT is a well documented procedure and you could use aftermarket S/RS6 suspension parts I'm sure.

As with anything that age a big aircon/ESP/ABS fault could be expensive and those engines like regular oil so buy on history.

Something like this would do the job if you could buy it very cheaply

http://cgi.ebay.co.uk/1999-AUDI-A6-2-7T-6-speed-AV...

Or looks like 2-2.5k for something decent with leather.

HiAsAKite

2,559 posts

278 months

Monday 26th July 2010
quotequote all
I've recently got a '99 A6 2.7T manual avant 230BHP version (the most 'detuned' version of the S4 engine.

Huge inside, and very very quiet and extremely comfortable. Engine is seems fairly refined, and does put some pace on, but bear in mind its a v. heavy car. Stearing feels fairly 'cushioned' (not sure if this is the dirty cheap budget tyres on the front that it came with- or a general A6 thing), but it rewards smooth progressive driving. Its possible to get it going quick off the mark, but to be honest its more the acceleration once you're going, it pulls very happily at motorway+ speeds.

Its really not something I would want to put round a track as the dynamics feel all wrong for that sort of driving, more something I would be happy to drive the length of the country with family plus lots and lots of baggage in any weather without breaking a sweat,

MPG wise, averaging 25mpg, if I'm lucky on a long run maybe I will average 30, but not managed that yet.. good news is that its happy running on 95ron all day. Supposed to be very easily tunable (I've seen quotes of c£200 to get 270-290 or so BHP, and £600 to 300, and thats without upgrading turbos etc which would take you beyond that), but I believe (and someone correct me if I'm wrong) ties it to running on super-unleaded..


Hope this helps smile

Edited by HiAsAKite on Monday 26th July 18:59

ge0rge

3,053 posts

236 months

Tuesday 27th July 2010
quotequote all
Would have thought a big turbo'd v6 liek that could hit 350 easily on std internals?

LeoSayer

7,861 posts

275 months

Tuesday 27th July 2010
quotequote all
I’ve got an A6 2.7T Sport with 250bhp and an auto box. I’ve had mine for about 3 years and have no intention of replacing it.

Very long gearing (85mph in 2nd) suits the torquey nature of the engine. Engine is very quiet and refined, even on full throttle. I’d prefer a bit more noise, especially that of a V8.

I’ve never taken on one track and would expect to melt the brakes within a couple of laps. They work fine on the road, but they don't feel like they will stand up to track-style punishment.

Fairly stiff suspension means that the ride is not great around town but it fabulously secure in all conditions. Having said that, I would still expect it to roll too much on a track. It copes well with punting it along a b-road and can cover ground very fast thanks to great grip and traction.

MPG averages around 22, with a best of 28 and a low of 17. As said earlier, it is designed to run on 95ron.

Things to note when buying:
Brakes are expensive, £300+ for a set of front discs and pads
A cambelt change is a long and expensive job if done properly, at least £600
Get the autobox oil changed if not done yet
Check the suspension for play. It’s heavy at the front and can be hard on the front links
Most should come with lots of toys like electric heated seats, Bose, rear parking sensors and auto dimming mirror

anonymous-user

Original Poster:

85 months

Tuesday 27th July 2010
quotequote all
Cheers guys! I have been reading some reviews and many people seem to say that they arent as reliable as they should be, any truth to this? What are they like around town? Call me mad, but i would do very few motorway miles in one. Whats the 6 speed like? What are they like for the diy mechanic?

Dr G

16,006 posts

273 months

Tuesday 27th July 2010
quotequote all
Had one come through as a part exchange with 180k on the clock a couple of months ago, drove very well and owner had done almost all of those miles with no major problems.

Tame Technician

2,467 posts

235 months

Tuesday 27th July 2010
quotequote all
They are not masivly unreliable, But a bad one could be a money pit very easily. NOt the nices to work on, very cramped engine bay, lost of breather pipes make of special brittle plasic that cracks if you so much as look at them funny. They tend to leak a bit of oil, cam chains can rattle.

If you get one make sure its a manual and thats one less ticking bomb. Cam belt and water pump straight away, thats a good day for a D.I.Y man.

I nearly got one a few years ago, it was so cheap is was almost free, but it needed a pair of turbos, and really the heads overhalled (blue smoke) I desided against it, but often wish I had, could have fitted hybrid turbos, flowed the heads and had a 300bhp sleeper.

I think of turbos as consumable, one day over 100,000 miles it will need a pair, it could be 250,000 miles, or it could be 101,000 miles. When it does need a pair of turbos they are £1000 each and it takes 2 days to fit them, engine out job.



anonymous-user

Original Poster:

85 months

Wednesday 28th July 2010
quotequote all
Is 2 days the engine out time even with all the right vag special tools? Well be sharing a workshop with a audi service centre which i am hoping will soften the blow, i would see it as a chance to stick something bigger on the side anyway, love the idea of a sleeper! Do you know if a car with the engine out could be moved about? (i am assuming the sub frame has to be dropped?), killing off a ramp ruins any chance of me doing the job cheaply (at lunch breaks, after work and weekends!). How much should a good one cost? On my phone so cant really check prices, but they seem to be all over the place from what have seen.

Tame Technician

2,467 posts

235 months

Sunday 1st August 2010
quotequote all
13.5 hours is the book time for the engine.

+ 1.5 per side to do the turbos with the engine out.

Elsa says you can take the front off and crain the engine out, so no need to remove subframe etc. It advises the engine brace bar be used to support the gearbox, but when we do the 4 cylinder engines in the same way a good block of wood between G box and subframe usually does the trick. Brace bar it a to commonly used tool to be left on a car with the engine out.