Inaccurate speedo
Discussion
These guys can Recalabrate your speedo
http://www.speedograph-richfield.com/
http://www.speedograph-richfield.com/
Edited by SILICONE KID on Sunday 1st August 23:10
Comadis said:
your question needs to be replied with a counter question:
do you run your Chim with original wheel and tyre size?
Thanks. It's a 93 4.0, 15 inch 50 profile on the front and 16 inch 45 profile on the rear. Not sure how that compares to standard without looking at the handbook though.do you run your Chim with original wheel and tyre size?
"It's a 93 4.0, 15 inch 50 profile on the front and 16 inch 45 profile on the rear."
these dimensions are useless without the width!!
pleae also post the TVR spec tyre size!!
225/50ZR15 (front) und 245/45ZR16 (rear) , according to my database from around 1996 onwards, cars with power steering
these dimensions are useless without the width!!
pleae also post the TVR spec tyre size!!
225/50ZR15 (front) und 245/45ZR16 (rear) , according to my database from around 1996 onwards, cars with power steering
Edited by Comadis on Monday 2nd August 12:59
finestjammy said:
Apologies, yes they are 225/50/15's and 245/45/16's. They are the estorils so are not original fitment, I promise to check the handbook when I can access it.
Originals for that car would have been 205/60/15 and 225/55/16. The rears count for the speedo, you have decreased the rolling radius by 4-5%. that makes the inherent speedo error worse.Red V8 said:
They all do that sir... or its a very common fault anyway... many people have tried to recalibrate but with mixed results.
Two benefits though
1. keeps you the right side of the law
2. improves your 0-60 time
Nope, he's the wrong side of the law.Two benefits though
1. keeps you the right side of the law
2. improves your 0-60 time
Contruction and use allows a 10% over-read and 0% under-read. If he's "about 10mph over the actual speed at anything above 30mph." then he's over-reading by between about 33% (at 30mph) and 10% (at 100mph) which is outside the C&U tolerances.
Speedos from the factory are built with an inbuilt over-read so you cannot (in normal use) have a speedo that under-reads. But, as said, he's got smaller tyres on which will make the speedo over-read even more.
jhfozzy said:
Red V8 said:
They all do that sir... or its a very common fault anyway... many people have tried to recalibrate but with mixed results.
Two benefits though
1. keeps you the right side of the law
2. improves your 0-60 time
Nope, he's the wrong side of the law.Two benefits though
1. keeps you the right side of the law
2. improves your 0-60 time
Contruction and use allows a 10% over-read and 0% under-read. If he's "about 10mph over the actual speed at anything above 30mph." then he's over-reading by between about 33% (at 30mph) and 10% (at 100mph) which is outside the C&U tolerances.
Speedos from the factory are built with an inbuilt over-read so you cannot (in normal use) have a speedo that under-reads. But, as said, he's got smaller tyres on which will make the speedo over-read even more.
Ok, as I understand it, with your 10mph-over-the-real-speed speedo you are most unlikely to be pulled by the BiB for speeding - so, yes, right side of the law.
However..... Construction and Use regs only permit for a 10% over read (0% under-read) so, at 10 mph over, your speedo does not align with these regs and so, I believe, would be an MoT fail.
And talking of speed limits, the speed limit is the speed limit is the law, if you go over it, you are breaking the law - any talk of a 10% allowance' + xmph is entirely at the discretion of the Force in question. It is not a 'right'. You can be 'done' for doing 31mph!
However..... Construction and Use regs only permit for a 10% over read (0% under-read) so, at 10 mph over, your speedo does not align with these regs and so, I believe, would be an MoT fail.
And talking of speed limits, the speed limit is the speed limit is the law, if you go over it, you are breaking the law - any talk of a 10% allowance' + xmph is entirely at the discretion of the Force in question. It is not a 'right'. You can be 'done' for doing 31mph!
Red V8 said:
jhfozzy said:
Red V8 said:
They all do that sir... or its a very common fault anyway... many people have tried to recalibrate but with mixed results.
Two benefits though
1. keeps you the right side of the law
2. improves your 0-60 time
Nope, he's the wrong side of the law.Two benefits though
1. keeps you the right side of the law
2. improves your 0-60 time
Contruction and use allows a 10% over-read and 0% under-read. If he's "about 10mph over the actual speed at anything above 30mph." then he's over-reading by between about 33% (at 30mph) and 10% (at 100mph) which is outside the C&U tolerances.
Speedos from the factory are built with an inbuilt over-read so you cannot (in normal use) have a speedo that under-reads. But, as said, he's got smaller tyres on which will make the speedo over-read even more.
As mentioned above, the speedo is not an MOT'able item, you don't even need one to pass an MOT as my brothers kit car proves (he uses his tomtom out and about), we asked the tester and he said the speedo wasn't on the list of checked items, BUT, you need one working and within tolerances for C&U purposes.
finestjammy said:
To clarify, at an actual 30mph it reads about 34mph on the speedo. It's from speeds over this that there seems to be a consistent 10mph over read.
13% over-reading then, still over the 10% limit. But it's immaterial now as you know what's causing it. Say for example you've done 40,000 actual miles in the car since you changed the tyre size, if you went everywhere at 30 (13% error), your odometer will have recorded 45,200 miles, adding an "extra" 5,200 miles onto the cars history. At the other end of the scale, your top speeds will look a lot better and you'll be "safer" going through "safety" cameras.At the end of the day, it's up to you as you'd have to be very, very unlucky to be caught out for this.
Gassing Station | Chimaera | Top of Page | What's New | My Stuff



