Screw to hold rear roof section in place - help!
Discussion
Hi everyone,
I noticed yesterday when putting the roof back on that I appear to have lost one of the internal screws that bolts the rear roof section in place. This is just over your right shoulder if you were sitting in the drivers seat. This isn't an issue right now as with the roof on and both of the rear screen bars locked in place it is rigid enough, but obviously is something I want to get fixed (hopefully easily, quickly and simply!). The one on the passenger side is fine.
Would anyone know where I could source a replacement please?
Hopefully this makes a crumb of sense - many thanks in advance
Cheers,
Neil.
I noticed yesterday when putting the roof back on that I appear to have lost one of the internal screws that bolts the rear roof section in place. This is just over your right shoulder if you were sitting in the drivers seat. This isn't an issue right now as with the roof on and both of the rear screen bars locked in place it is rigid enough, but obviously is something I want to get fixed (hopefully easily, quickly and simply!). The one on the passenger side is fine.
Would anyone know where I could source a replacement please?
Hopefully this makes a crumb of sense - many thanks in advance

Cheers,
Neil.
Why not take another one out and then go on to the internet where there are literally thousands of bolt suppliers.
I'm not sure which one you're after form your description, but I just replaced all of the rear roof section bolts with stainless and new anodised counter sunk washers.
The pivot bolts I didn't change, but they're probably M8 x 80mm button heads . . The ones in the TVR are original uncoloured, you could have zinc plates ones or go for stainless as it's not a particularly stressed pivot.
However, if it is the pivot then there's 2 bearing washer in there as well, but these are soon fabricated . ..
Available here . .
http://www.aruncas.com/acatalog/M8_Button_Head.htm...
or here . .
http://www.shop4fasteners.co.uk/acatalog/Socket_Bu...
If they are the rear roof section bolts then they are M6 x 45's (I think) countersunk cap heads. You'll also need the counter sunk washers and a nyloc nut for the back of it. You'll also then have the great fun of trying to do the b
d's back up, helps to have an assistant.
I sourced my new ones from here as they also do the ally counter sunk washers in differing colours . ..
http://www.tastynuts.com/Products/Stainless_steel
I'm not sure which one you're after form your description, but I just replaced all of the rear roof section bolts with stainless and new anodised counter sunk washers.
The pivot bolts I didn't change, but they're probably M8 x 80mm button heads . . The ones in the TVR are original uncoloured, you could have zinc plates ones or go for stainless as it's not a particularly stressed pivot.
However, if it is the pivot then there's 2 bearing washer in there as well, but these are soon fabricated . ..
Available here . .
http://www.aruncas.com/acatalog/M8_Button_Head.htm...
or here . .
http://www.shop4fasteners.co.uk/acatalog/Socket_Bu...
If they are the rear roof section bolts then they are M6 x 45's (I think) countersunk cap heads. You'll also need the counter sunk washers and a nyloc nut for the back of it. You'll also then have the great fun of trying to do the b
d's back up, helps to have an assistant.I sourced my new ones from here as they also do the ally counter sunk washers in differing colours . ..
http://www.tastynuts.com/Products/Stainless_steel
Edited by Johno on Wednesday 4th August 14:29
Chimaera001 said:
Thanks Johno - I'll look at those links; it's the screw that is effectively the hinge on the side of the roof (almost right beside the seatbelt) as opposed to the screws and studs at the rear of the roof. Appreciate the help though! 
You'll definitiely need to remove the other side and check the size of the bolts as I'm guessing having had them in my hands recently. You'll also need to check whether the washers are still there or not, they often vary side to side to square the roof up.
How on earth did you lose that though, they're not small and they gotta come out a long way before falling away . .
Chimaera001 said:
Hi everyone,
I noticed yesterday when putting the roof back on that I appear to have lost one of the internal screws that bolts the rear roof section in place. This is just over your right shoulder if you were sitting in the drivers seat. This isn't an issue right now as with the roof on and both of the rear screen bars locked in place it is rigid enough, but obviously is something I want to get fixed (hopefully easily, quickly and simply!). The one on the passenger side is fine.
Would anyone know where I could source a replacement please?
Hopefully this makes a crumb of sense - many thanks in advance
Cheers,
Neil.
I have used these guys many times before:I noticed yesterday when putting the roof back on that I appear to have lost one of the internal screws that bolts the rear roof section in place. This is just over your right shoulder if you were sitting in the drivers seat. This isn't an issue right now as with the roof on and both of the rear screen bars locked in place it is rigid enough, but obviously is something I want to get fixed (hopefully easily, quickly and simply!). The one on the passenger side is fine.
Would anyone know where I could source a replacement please?
Hopefully this makes a crumb of sense - many thanks in advance

Cheers,
Neil.
Apex Fasteners Ltd
Place page
494 Ipswich Road
Slough SL1 4EP
01753 525 334
These guys maybe close to you, they have a huge range and may have one in stock. Just take one and show them.
Gassing Station | Chimaera | Top of Page | What's New | My Stuff



