Skoda VW Front bushes
Author
Discussion

pbaker43

Original Poster:

268 posts

199 months

Monday 9th August 2010
quotequote all
Just looking for some info on the removal of the big alloy casting that holds the large bush on the front suspension. On the casting there are two large bolts one looks as if it goes into the foot well the other goes into the the body next to the spring cup. What i need to know is are these a captive nut in the body work, or not?
I do not want to undo the bolt only to find I can not tighten it up again. This is the first time I have under taken such a job on a new-ish car, as the cost in the garage here in France is too high for me. Thanks for any help

weezb

4,246 posts

195 months

Monday 9th August 2010
quotequote all
pbaker43 said:
Just looking for some info on the removal of the big alloy casting that holds the large bush on the front suspension. On the casting there are two large bolts one looks as if it goes into the foot well the other goes into the the body next to the spring cup. What i need to know is are these a captive nut in the body work, or not?
I do not want to undo the bolt only to find I can not tighten it up again. This is the first time I have under taken such a job on a new-ish car, as the cost in the garage here in France is too high for me. Thanks for any help
Hi you don't say which model, the guide in the link below is for a Fabia vRS, hope this may be of some use to you:

http://briskoda.net/forums/topic/92625-fabia-wishb...

If not then please join up the site and search/ask (God i sound like a recruiter for that site today smile )

pbaker43

Original Poster:

268 posts

199 months

Tuesday 10th August 2010
quotequote all
Hi Weezb,

Sorry it is for a Fabia, spot on with the info thanks very much for the quick reply
smile I will be tackling this little project this weekend, to help put the bush in can I use ‘copper grease’ on the inside of the casting and the exterior of the bush??

weezb

4,246 posts

195 months

Wednesday 11th August 2010
quotequote all
pbaker43 said:
Hi Weezb,

Sorry it is for a Fabia, spot on with the info thanks very much for the quick reply
smile I will be tackling this little project this weekend, to help put the bush in can I use ‘copper grease’ on the inside of the casting and the exterior of the bush??
The straight answer is I don't know if copper grease is OK to use, the "kit" normally comes from VAG with a lubricant for that purpose, though I've heard of folk using washing-up liquid. I'll ask around though and get back to you.

UPDATE: The general consensus seems to be copper grease will be OK, (as an aside washing up liquid apparently has a high salt content which is bad for the metal parts, and so should be avoided).

So, Copper grease OK and Waxoyl OK.
also
VW Special lube for fitting Console bush (Assembly lubricating oil) - Part No G 294 421 A1

Edited by weezb on Wednesday 11th August 18:41

pbaker43

Original Poster:

268 posts

199 months

Thursday 12th August 2010
quotequote all
Hi Weezb,
Thanks for the info on the copper grease have plenty so that should do. I remember now about washing up liquid not to use it on windscreen surrounds due to the salt attacking the paint work or the chrome. eek
As for the lube I will ask VW but knowing the French they may not sell it, this ensures you bring the car to them. readit
Just a note to foreign travellers, 99% of garages in France are bandit they do the minimum or no work for maximum pay i.e; on the south coast of France I was charged 600 euros for an 100A alternator and 100 euros to fit it, the same product was 200 euros in Grenoble. I have since found out I can get my alternator fully reconditioned in the UK by a friend for £60.

Who me ?

7,455 posts

243 months

Friday 13th August 2010
quotequote all
weezb said:
pbaker43 said:
Just looking for some info on the removal of the big alloy casting that holds the large bush on the front suspension. On the casting there are two large bolts one looks as if it goes into the foot well the other goes into the the body next to the spring cup. What i need to know is are these a captive nut in the body work, or not?
I do not want to undo the bolt only to find I can not tighten it up again. This is the first time I have under taken such a job on a new-ish car, as the cost in the garage here in France is too high for me. Thanks for any help
Hi you don't say which model, the guide in the link below is for a Fabia vRS, hope this may be of some use to you:

http://briskoda.net/forums/topic/92625-fabia-wishb...

If not then please join up the site and search/ask (God i sound like a recruiter for that site today smile )
No -you don't - I often push folks thAT WAY - for Skoda advice - best place out .