Camshaft Harness HELP
Discussion
So, after getting no response on an earlier thread I have been told that the reason that my Diesel Passat (PD) 130 dropped down to 3 cylinders yesterday (after after stopping and re-starting was ok) could well be the camshaft wiring harness. Apparently they are prone to cracking up and this would cause the intermittent problem (It happened about 2 months ago but hasn't happened again until yesterday). Could this be the cause, I was told that it probably wasn't a faulty injector as it would have happened more regularly.
Im driving to Germany on Friday and I need it sorted, please help!
Im driving to Germany on Friday and I need it sorted, please help!
With out testing the car in a failed state you can only guess. Harness is cheaper than an injector and injectors dont usually pay up intermitantly, they usualy fail and stay failed.
But the only way to correctly diagnose your concern is, with the vehicle in a failed state (you cant test for a fault, when its not faulting)
Read the fault memory or check the MVB data to identify which cylinder is misfiring. Then swap the injector from that cylinder to a good one.
If the misfire remains on the same cylinder its the injection harness.
If the misfire moves to the cylinder you moved the injector too, its the injector.
PD injectors are about £500 each, harness is arround £150. So its well worth a two hours labout it takes to do the test.
But the only way to correctly diagnose your concern is, with the vehicle in a failed state (you cant test for a fault, when its not faulting)
Read the fault memory or check the MVB data to identify which cylinder is misfiring. Then swap the injector from that cylinder to a good one.
If the misfire remains on the same cylinder its the injection harness.
If the misfire moves to the cylinder you moved the injector too, its the injector.
PD injectors are about £500 each, harness is arround £150. So its well worth a two hours labout it takes to do the test.
Tame Technician said:
With out testing the car in a failed state you can only guess. Harness is cheaper than an injector and injectors dont usually pay up intermitantly, they usualy fail and stay failed.
But the only way to correctly diagnose your concern is, with the vehicle in a failed state (you cant test for a fault, when its not faulting)
Read the fault memory or check the MVB data to identify which cylinder is misfiring. Then swap the injector from that cylinder to a good one.
If the misfire remains on the same cylinder its the injection harness.
If the misfire moves to the cylinder you moved the injector too, its the injector.
PD injectors are about £500 each, harness is arround £150. So its well worth a two hours labout it takes to do the test.
Thanks But the only way to correctly diagnose your concern is, with the vehicle in a failed state (you cant test for a fault, when its not faulting)
Read the fault memory or check the MVB data to identify which cylinder is misfiring. Then swap the injector from that cylinder to a good one.
If the misfire remains on the same cylinder its the injection harness.
If the misfire moves to the cylinder you moved the injector too, its the injector.
PD injectors are about £500 each, harness is arround £150. So its well worth a two hours labout it takes to do the test.

Lordbenny said:
Im going for a harness change, apparently the rocker cover has to be replaced so in all its costing £268 (the harness is only £50, rocker cover £150 + labour) I've got a good mechanic 
Did this on my PD150 4 or 5 months back.
Had the occasionaly misfire (which was logged) and the odd other random fault came up (can't remember now what they were but they seemed unrelated and I don't think they got logged).
Consensus from a search on uk-mkivs of the fault code for the misfire was that it was most likely the injector loom. £50 on parts and an hour or two fiddling around had it all sorted and the problem hasn't come back.
Why do you need the rocker cover changed? Mine was fine and there's no sign of it leaking.
Duncan
Tame Technician said:
You do not need a rocker cover, just the gasket.
I've done loads only one that ever leaked I over tightened and cracked it. Customer got it for free.
I'm being told by a very reputable source (mate who's a VW technician!)Gasket comes with the plastic rocker cover, because the covers twist and warp you cant re-use them!I've done loads only one that ever leaked I over tightened and cracked it. Customer got it for free.
Tame Technician said:
Spend if you want to.
Its up to you. I was just saying I have personally with my own hands removed and refitted quite alot of 1.9TDI cam covers in my 5 years as a technician in an Audi centre, replacing only the gasket.
Only one of mine has ever leaked.
Are you saying that you can buy a gasket without a cover?Its up to you. I was just saying I have personally with my own hands removed and refitted quite alot of 1.9TDI cam covers in my 5 years as a technician in an Audi centre, replacing only the gasket.
Only one of mine has ever leaked.
Gassing Station | Audi, Seat, Skoda & VW | Top of Page | What's New | My Stuff


