which is the best camshaft for a 400???
which is the best camshaft for a 400???
Author
Discussion

chimaera1855

Original Poster:

334 posts

199 months

Tuesday 10th August 2010
quotequote all
was looking around on ebay about which camshaft i can use on my car.i am planing to supercharge the car.can i still change to a performance camshaft???like piper etc....

SILICONE KID

14,997 posts

262 months

Tuesday 10th August 2010
quotequote all

Chimjunkie

2,879 posts

242 months

Tuesday 10th August 2010
quotequote all
Be careful with cam choice for a supercharger. Do a search on this one. But many of the wilder cams are not suitable. Dont think this is an option if you intend to supercharge.

spend

12,581 posts

282 months

Wednesday 11th August 2010
quotequote all
You can't have much of a wild cam anyway can you? Basic 4.0's don't normally have piston valve cutouts or the valve guides for high lifts.

Confuses me though that with the extra pressure you should be able to have longer duration cams, can't say I buy into the soft cam ideology?e

hiltonig

3,153 posts

239 months

Wednesday 11th August 2010
quotequote all
well i have go a cam for supercharging done by V8dev, ill know how well it works soon !!, it was a one design by Rob, you might be best speaking to him.

Edited by hiltonig on Wednesday 11th August 12:40

Pupp

13,044 posts

303 months

Wednesday 11th August 2010
quotequote all
Perceived wisdom is that a 218 is the one for blown applications. Like Spend, I'd have assumed there's no inherent reason why longer duration/overlaps can't be used above atmospheric pressure. The effects will be the same, just more so... think much of this might come from the fact that traditional positive displacement blowers are renowned for boosting low/mid-range torque (so it makes sense to build on an engine that naturally delivers this characteristic), but where the centrifugal types now commonly used are more top-end focused, I'd like to see the theorestic arguments for them not working with bigger cams smile

v8 racing

2,064 posts

282 months

Wednesday 11th August 2010
quotequote all
long duration cams can be used to work on fi engines but the timing figures will be completely different to a na cam, the fact people use mild cams is purely of one reason they are easy to supply! and that isnt having a go at anybody, but a lets say going from a 4.5ltr engine to a 5.0 engine will require different cam timing figures to get the most from it, putting a supercharger on an engine is like turning a 5.0 na engine into a 7.0 engine, also a big reason for people going fi is to gain good power while still having good driveability and fuel consumption, a wild long duration cam wont let this happen, but a mild of the shelf cam isnt going to give you the optimum gains of a blower, to be frank a mild of the shelf cam will work fairly good from tickover to just over peak torque say 4500rpm on a rover, a long duration cam will only benefit from around peak torque upwards but loose a shed load of fuel consumption and torque low down. a proper blower cam should work from tickover all the way through to the rev limiter.

BenRelle

1,796 posts

205 months

Monday 13th September 2010
quotequote all
You don't want a long duration cam for a supercharged (or turbo) engine because of the pressure charging just pushes the extra mixture you want in the cylinder out of the exhaust. Simple really.

High lift, short duration best for this application.