T5 recon costs?
Discussion
My gearbox has a slight crunch when changing up from 4th to 5th and under fast acceleration only. If I'm slow with the change no probs.
Feels like 5th syncro mesh going?
Including labour what are the costs for reconditioning and is it worth getting a taller 1st gear to aid acceleration as 2nd doesn't quite make 60mph so have to go into 3rd. Does everybody find that? Have a '98 450.
Feels like 5th syncro mesh going?
Including labour what are the costs for reconditioning and is it worth getting a taller 1st gear to aid acceleration as 2nd doesn't quite make 60mph so have to go into 3rd. Does everybody find that? Have a '98 450.
I noticed that I get a little crunch at times. I solved the issue by pushing the clutch pedal all the way to the floor. This could be a bad habbit by me, but I generally push the pedal as far as needed (or assumed). Going all the way (so to speak) solved the problem for me.
Also, my Chimaera 400 jumps out of second if the clutch is not disengaged quickly. e.g. approaching a roundabout and gliding, selecting 2nd, waiting for the road speed to be right to engage the gear and 'grrr crunch' 2nd jumps out. Again, this could be my bad habits.
On the 2nd gear issue I find 2nd doesn't quite get as fast as I would like. Last night I hit 60 in second but that was pushing 5,500 RPM (my personal limit).
Also, my Chimaera 400 jumps out of second if the clutch is not disengaged quickly. e.g. approaching a roundabout and gliding, selecting 2nd, waiting for the road speed to be right to engage the gear and 'grrr crunch' 2nd jumps out. Again, this could be my bad habits.
On the 2nd gear issue I find 2nd doesn't quite get as fast as I would like. Last night I hit 60 in second but that was pushing 5,500 RPM (my personal limit).
Gassing Station | Chimaera | Top of Page | What's New | My Stuff



