Routing of extra wires.
Discussion
If you haven't done anything to prevent water running down the inner wing that is a likely water trap.
I wouldn't use it from past experience of problems (even trying to solve with nearly 2 tubes of sikaflex!) even though I now divert the water down the wings which you should do at least IMHO.
I wouldn't use it from past experience of problems (even trying to solve with nearly 2 tubes of sikaflex!) even though I now divert the water down the wings which you should do at least IMHO.
spend said:
If you haven't done anything to prevent water running down the inner wing that is a likely water trap.
I wouldn't use it from past experience of problems (even trying to solve with nearly 2 tubes of sikaflex!) even though I now divert the water down the wings which you should do at least IMHO.
I have got to try though as it's a nice entry point Spend,did read sometime you mentioning this point but thought you may be referring to the main engine loom grommet behind the heater hoses I wouldn't use it from past experience of problems (even trying to solve with nearly 2 tubes of sikaflex!) even though I now divert the water down the wings which you should do at least IMHO.
i did intend to divert the water from the heat shield/lower inner wing area at some point anyway as i def don't want water coming in at this point especially as my car as been water tight for sometime although it don't get wet much anyways apart from washing
that would also be one of the worst are'a to take in water seeing as it's location is close to the fusebox 
Gassing Station | Chimaera | Top of Page | What's New | My Stuff





