Discussion
I have painted mine (V8S not chim) with Halfords Very High Temperature Paint - I used the metallic black though its more of a grey. Holding up so far though I did have the manifolds shotblasted when I had the chassis done.
I have also done the entire exhaust system.
It doesn't go all that far - about a can per manifold, plus 2 or 3 more for the Y piece and exhaust system. It does cover really well, 2 coats is plenty.
It dries really quick too so it doesn't take long to do.
It looks a lot better if you let it dry then give it a gentle buff with a dry cloth.

Pic below is after the engine has been run up to temp a few times.

I have also done the entire exhaust system.
It doesn't go all that far - about a can per manifold, plus 2 or 3 more for the Y piece and exhaust system. It does cover really well, 2 coats is plenty.
It dries really quick too so it doesn't take long to do.
It looks a lot better if you let it dry then give it a gentle buff with a dry cloth.

Pic below is after the engine has been run up to temp a few times.

Edited by Barkychoc on Sunday 15th August 11:18
Gassing Station | Chimaera | Top of Page | What's New | My Stuff


