Wooohooo! It passed! (+ a question)
Wooohooo! It passed! (+ a question)
Author
Discussion

ShinGaz

Original Poster:

85 posts

216 months

Tuesday 17th August 2010
quotequote all
Well I'm chuffed! My bargin basement TVR S3c just passed it's Mot first time with no faults or advisories.

With the cost of a rear end respray, a new battery and a full service it now owes me about £3000, but I really am utterly thrilled with it.

I do have one question... I've found that on the lovely bumpy roads here in Wiltshire that a panel in the passenger footwell keeps coming down/open and exposing what appears to be a part of the wiring loom. I've had a good poke around and put the offending panel back in place, but I'm worried that any large bump could cause it to fall open again.
Has anyone else experienced the problem? If so is there a quick/easy/widely known fix to this?
Thanks in advance for any help. smile

Roy C

4,213 posts

313 months

Tuesday 17th August 2010
quotequote all
ShinGaz said:
I do have one question... I've found that on the lovely bumpy roads here in Wiltshire that a panel in the passenger footwell keeps coming down/open and exposing what appears to be a part of the wiring loom.
It's to access the ECU & fuses. I replaced the original fixing on mine with a nut and bolt arrangement.

Oldred_V8S

3,764 posts

267 months

Tuesday 17th August 2010
quotequote all
Roy C said:
ShinGaz said:
I do have one question... I've found that on the lovely bumpy roads here in Wiltshire that a panel in the passenger footwell keeps coming down/open and exposing what appears to be a part of the wiring loom.
It's to access the ECU & fuses. I replaced the original fixing on mine with a nut and bolt arrangement.
What he said yes

v8s4me

7,275 posts

248 months

Tuesday 17th August 2010
quotequote all
Mine's held up with green garden wire. Out of sight and works a treat!

techbotics

1,805 posts

211 months

Tuesday 17th August 2010
quotequote all
Ooo mines got a cable tie.. didn't know there was a proper (?) fixing..

lol

Damian S3

ShinGaz

Original Poster:

85 posts

216 months

Wednesday 18th August 2010
quotequote all
Thanks for the suggestions everyone. I'm gonna take a look at this loose panel this weekend.

Ceejay73

489 posts

257 months

Friday 20th August 2010
quotequote all
Roy C said:
It's to access the ECU & fuses. I replaced the original fixing on mine with a nut and bolt arrangement.
yikesYours had a proper fixing originally?
Mine just gets stuffed back up and wedged, seems to stay up by witchcraft whistle