Undertray on an A6
Author
Discussion

Marcellus

Original Poster:

7,210 posts

250 months

Tuesday 17th August 2010
quotequote all
I very foolishly lost the undertray from the A6 and was wondering what purpose they serve and how important they are?

Therefore, does it need replacing in the short/medium/long term?

v8 jago

982 posts

284 months

Tuesday 17th August 2010
quotequote all
If you mean the plastic try thing on the bottom of the engine, Then they are just for aero dynamics. I found them a hastle taking them off and clips breaking and tie rapping them back on. They dont make any difference that you would notice.

Marcellus

Original Poster:

7,210 posts

250 months

Wednesday 18th August 2010
quotequote all
thanks V8 Jago.. that's the one!

jith

2,752 posts

246 months

Wednesday 18th August 2010
quotequote all
v8 jago said:
If you mean the plastic try thing on the bottom of the engine, Then they are just for aero dynamics. I found them a hastle taking them off and clips breaking and tie rapping them back on. They dont make any difference that you would notice.
Not so I'm afraid: they serve the dual purpose of silencing the engine and transmission, particularly at speed, and keeping the engine bay clean and water off the drive belts and pulleys.

It's a very important bit of kit.

I'm trying to work out how you could loose something that is around 6 feet square!! silly

Marcellus

Original Poster:

7,210 posts

250 months

Wednesday 18th August 2010
quotequote all
jith said:
I'm trying to work out how you could loose something that is around 6 feet square!! silly
Ok not exactly "lost" per say.... but "removed" by a ditch across a track I was using to get to a car park.

Removed to the point that the 3 eyes that it attaches to on the bumper are no longer there and the mounting piece of metal across the engine got bent.

I think if I get a replacement then I could drill out new fixing pionts on the front bumper and replace the metal bracket.. just got to find a replacement undertray now.

Marcellus

Original Poster:

7,210 posts

250 months

Wednesday 18th August 2010
quotequote all
Just a quick further question; how do I know which model of A6 I've got I think it's C5 or C6.

It's an A6 Avant Quattro on a 2002 plate.

goldblum

10,272 posts

198 months

Wednesday 18th August 2010
quotequote all
It's a C5.

jith is absolutely correct,

there's all types of pulleys and things under there that are exposed when you 'lose'the tray!

Escort2dr

3,641 posts

232 months

Wednesday 18th August 2010
quotequote all
Bummer - noticed mine was missing recently. I am convinced it is still at the garage that serviced it but no sign apparently.

Bet they cost a fortune to replace too.

v8 jago

982 posts

284 months

Wednesday 18th August 2010
quotequote all
jith said:
v8 jago said:
If you mean the plastic try thing on the bottom of the engine, Then they are just for aero dynamics. I found them a hastle taking them off and clips breaking and tie rapping them back on. They dont make any difference that you would notice.
Not so I'm afraid: they serve the dual purpose of silencing the engine and transmission, particularly at speed, and keeping the engine bay clean and water off the drive belts and pulleys.

It's a very important bit of kit.
I removed mine a few years ago and my car is still quiet clean and running fine with no problems even with the 183000 miles on it smile

hilly

146 posts

287 months

Wednesday 18th August 2010
quotequote all
Escort2dr said:
Bummer - noticed mine was missing recently. I am convinced it is still at the garage that serviced it but no sign apparently.

Bet they cost a fortune to replace too.
http://cgi.ebay.co.uk/Audi-A6-C5-Engine-Undertray-...

Escort2dr

3,641 posts

232 months

Wednesday 18th August 2010
quotequote all
Cheers for that - not too far from me either.

stewies_minion

1,167 posts

218 months

Wednesday 18th August 2010
quotequote all
That's a bit of a bargain. I killed one in the snow a couple of years ago in a Passat and IIRC it was £80 + vat...