Low pressure side of power steering
Low pressure side of power steering
Author
Discussion

anonymous-user

Original Poster:

85 months

Tuesday 24th August 2010
quotequote all
Anyone think the low pressure side of the power steering set up is more than 10bar.
As I reassemble I have some nice clean 1/2 heater hose rated to 10 bar , that is a hell of a lot smarter than I can get the original hose I am taking off.

Is this side low pressure ?
Do you think this heater hose will be OK ?

Thanks

TJC46

2,199 posts

237 months

Tuesday 24th August 2010
quotequote all
I think the 2 no pipes from the reservoir [feed and return] can not be under any real pressure,they are only attached with jubilee clips. Its only from the pump to the steering rack that has to be pressure rated. This is just my theory, anyone else confirm or correct this?

BliarOut

72,863 posts

270 months

Tuesday 24th August 2010
quotequote all
It's low pressure but a fair flow rate. Is your proposed pipe heat and oil resistant?

anonymous-user

Original Poster:

85 months

Tuesday 24th August 2010
quotequote all
Resistant to heat I will check against oil, by goggling the spec
Thanks

Barkychoc

7,848 posts

235 months

Tuesday 24th August 2010
quotequote all
I'm using the citroen electric pump and the return hose just dumps it back in the reservoir, with very little pressure to speak of, and you can take the lid off while its running and nothing happens.
I can't imagine there's much difference on the engine driven pump.

BliarOut

72,863 posts

270 months

Wednesday 25th August 2010
quotequote all
Without wishing to sound like anyone's mum, one of the reasons that racks fail is the pipe degrading internally. I'd pay what it costs for the right stuff biggrin Then again, I'm paranoid, I've got an ATQ filter in my return line...

Simon says

19,466 posts

252 months

Wednesday 25th August 2010
quotequote all
BliarOut said:
Without wishing to sound like anyone's mum, one of the reasons that racks fail is the pipe degrading internally. I'd pay what it costs for the right stuff biggrin Then again, I'm paranoid, I've got an ATQ filter in my return line...
And people neglecting to change the oil periodically rolleyes the system as moving parts after all.... confused

BliarOut

72,863 posts

270 months

Wednesday 25th August 2010
quotequote all
Old PAS fluid? What's that? confused

Del 203

12,728 posts

280 months

Wednesday 25th August 2010
quotequote all
BliarOut said:
Old PAS fluid? What's that? confused
You'll find it on your garage floor biggrin

HTH

spend

12,581 posts

282 months

Wednesday 25th August 2010
quotequote all
Shell have a pipeline from Rob's garage don't they? hehe

Del 203

12,728 posts

280 months

Wednesday 25th August 2010
quotequote all
spend said:
Shell have a pipeline from Rob's garage don't they? hehe
Needs capping apparently wink

BliarOut

72,863 posts

270 months

Wednesday 25th August 2010
quotequote all
My garage floor is almost spotless biggrin

spend

12,581 posts

282 months

Wednesday 25th August 2010
quotequote all
Flock of flying pigs odds territory?

spend

12,581 posts

282 months

Wednesday 25th August 2010
quotequote all
BliarOut said:
My garage floor is almost spotless biggrin
Shell are very good at getting absolutely the last drop out of any well whistlewhistlewhistle

Simon says

19,466 posts

252 months

Wednesday 25th August 2010
quotequote all
Del 203 said:
BliarOut said:
Old PAS fluid? What's that? confused
You'll find it on your garage floor biggrin

HTH
Ouch! hehe that's low biggrin