Engine Oil leak Help
Discussion
History
Had a tapping from the engine after giving it some heavy right foot, tapping continued while car was sat on tick over. Stoppped and restarted the engine and tapping dissaperd. Had just done an oil change about 30 odd mile before changed to silkolene from a mineral oil did full drain and replace. Checked oil level yesterday and it a few mm over Full. Only thing could think of was something stopped a follower from pumping up muck in the hole which released when engine was turned off.
Was looking around the top of the engine passenger side all fine but on drivers side there is a thin coating of oil on the inlet manifold, fuel rail, and around injector bases more towards back of engine. Any ideas what has caused this ?
Had a tapping from the engine after giving it some heavy right foot, tapping continued while car was sat on tick over. Stoppped and restarted the engine and tapping dissaperd. Had just done an oil change about 30 odd mile before changed to silkolene from a mineral oil did full drain and replace. Checked oil level yesterday and it a few mm over Full. Only thing could think of was something stopped a follower from pumping up muck in the hole which released when engine was turned off.
Was looking around the top of the engine passenger side all fine but on drivers side there is a thin coating of oil on the inlet manifold, fuel rail, and around injector bases more towards back of engine. Any ideas what has caused this ?
scotty_d said:
Over filled it if its over the max line and just spewing the extra oil out?
That won't do it.I always overfill mine about 6-8 mm over full for track days and no problem.
This reduces oil surge and seems to get rid of the dreaded follower clatter during a full on session.
Mine did similar to the O/P's once after an oil change and then sat on a hill.
Started up and engine top end clatter for a bit then disappeared??
Gassing Station | Chimaera | Top of Page | What's New | My Stuff


