Washer troubles!
Washer troubles!
Author
Discussion

aidanbree

Original Poster:

298 posts

234 months

Thursday 26th August 2010
quotequote all
Last year I replaced my standard wipers with the ones with the attached water nozzles. A few weeks ago I hastily attempted to find out why the water pressure was crap from the wipers. In doing so I managed to lose the water pipe which fell below the grill.

I since read in the bible that I shoudn't have made that mistake! Last night I decided that the dash was going to have to come off in order to fish out the washer tube. I got the three bolts out before giving into the pending darkness.

Mine is a 94 model so I fear that it might not have the hatch that the bible refers to. Has anyone any guidance into where I need to create this/how?

When I was shuffling the dash I noticed that the veneer is coming away at the edges. Do I need to completely remove the dash to get this done? I don't want to risk destroying the dash if I can sort it out with suspending the dash.

I read about people having issues with the washer tubing having collapsed. How easy is it to replace the run of tubing to see if I get better pressure?

Should I be looking to shore up the dash veneer with glue whilst it is accessible? Any recommendations?

Cheers

Aidan

Cider Andy

1,889 posts

256 months

Thursday 26th August 2010
quotequote all
aidanbree said:
...Should I be looking to shore up the dash veneer with glue whilst it is accessible?
It certainly won't harm, especially if the veneer is still in one piece and still stuck to the backing everywhere else. Otherwise it's a few-hundred-quid job to redo it.

The guy that did mine experimented with a number of adhesives to stick it to mild steel but ultimately it came apart again. Steve Edwards (who makes the Chimaera hard top in Halifax) appears to have successfully replaced his own dash veneer with Sikaflex...

aidanbree

Original Poster:

298 posts

234 months