Clutch bleeding
Discussion
Wish the search facility would return howver.........
Engine back in can't get any pressure on the clutch. Master cylinder was new 2 years ago. Slave was cleaned up and looks OK. Clutch spurts a bit of fluid with nipple open, but doe not get much pressure when closed.
It is moving the clutch bearing but not much??
What do you think
Tried wife in car me shouting floor ! release ! etc and a one way bleed valve kit when she got pi**ed of and told me to get lost....
Thanks
Engine back in can't get any pressure on the clutch. Master cylinder was new 2 years ago. Slave was cleaned up and looks OK. Clutch spurts a bit of fluid with nipple open, but doe not get much pressure when closed.
It is moving the clutch bearing but not much??
What do you think
Tried wife in car me shouting floor ! release ! etc and a one way bleed valve kit when she got pi**ed of and told me to get lost....
Thanks
I had a problem with my clutch recently (lots of pedal travel with no resistance). It wasn't immediately obvious what was at fault, i.e. master cylinder or slave cylinder. I wanted it fixed quickly, so bought both just in case. It turned out to be the master cylinder, so I have a working slave cylinder that you can borrow if you want to eliminate that from your enquiries. Your profile says you're in West Sussex, so you could be anything from 5 miles to 50 miles from where I live (Waterlooville). Send me an email if you're interested.
Gassing Station | Chimaera | Top of Page | What's New | My Stuff


