Discussion
Hi guys, still new to chim ownership so I thought I would ask the experts on here.
I appear to have a small leak from the bottom passenger side of the radiator.( although it is difficult to see) My question is, is it easy to get the rad out?, it looks a lot more difficult than the MGB I had before. Or would I be better to save time and just take it to the local garage and get them to do it.
Or as the leak is only minor is there somthing I can add to the coolant system like radweld to see if this stops it.??
Also if it is the rad leaking, can they be repaired or do I need a new one?.....cost??
Many thanks Madas....etc
I appear to have a small leak from the bottom passenger side of the radiator.( although it is difficult to see) My question is, is it easy to get the rad out?, it looks a lot more difficult than the MGB I had before. Or would I be better to save time and just take it to the local garage and get them to do it.
Or as the leak is only minor is there somthing I can add to the coolant system like radweld to see if this stops it.??
Also if it is the rad leaking, can they be repaired or do I need a new one?.....cost??
Many thanks Madas....etc
You may find some help on here http://www.chimaerapages.com/index.php
kevin63 said:
I would say it is fairly easy to take out, then you can take it to a local rad place and get it sorted. I had mine done for around £150 I think it was and they got it sorted within a couple of days. I got mine done at a place called Auto Rad in Chesterfield, Derbyshire.
Went past them the other day and not sure if they are still there BTW... I'll take a closer look next time.madasafrog666 said:
Hi, Can you explain what the " metal pipe",?? is there anything on the market like a haynes manual for the TVR.
http://www.tvrcc-shop.co.uk/acatalog/TVRCC_Catalogue_Road_testsHistoriesCollectors_Guides_34.htmlThis is as close as you'll get to a Haynes manual, it's refered to on here as "The Bible".
I also have a leak in mine (Again a Pre-Serp) and I was gonna replace the hoses etc too.
http://www.actproducts.co.uk/shop/sc005-tvr-chimaera-preserp-stainless-coolant-pipes-p-341.html
http://www.actproducts.co.uk/shop/hk005a-tvr-chimaera-hose-kit-preserpentine-p-236.html
This is to give an example, there may be other places that are cheaper etc.
Mark
Rad it's easy to remove to make it easier remove the air induct hose first. To do this there is bolt passenger side front just up and across from the bonet hinges. undo this the air filter will drop down in the grill/number plate recess undo the clips and pull the hose through the hole by the rad. this give you more space to get it out. undo the top and bottom hose plus the two bolts holding the rad and lift out. It is a bit of a lump so depending on how strong you are it is a good idea to have a helping hand to side it out.
I had mine record for about £100 a yfew years back so its not that bad.
I had mine record for about £100 a yfew years back so its not that bad.
Tvr made more than one car, and each probably had a design different in one area or another. The induction pipes differ between early & late as does grille access 
Generally hoses off, fan connectors off, 2 bolts through the bodywork, just lift rad (bottom is secured just with dowels) and flip onto the exhaust y-piece then you can lift out comfortably. No need to remove the bonnet IME.

Generally hoses off, fan connectors off, 2 bolts through the bodywork, just lift rad (bottom is secured just with dowels) and flip onto the exhaust y-piece then you can lift out comfortably. No need to remove the bonnet IME.
I recently did mine. I took the bonnet off as it made access so much better.
One thing I would say is mark the exact distance between the 2 mounting holes that the rad sits in, on a piece of string and tell the fabricators to weld the new rad to the that exact distance. I didn't do this and when the rad was welded back together it was say 5mm wider than the original and it only just fitted between the engine bay sides and the mounting holes.
One thing I would say is mark the exact distance between the 2 mounting holes that the rad sits in, on a piece of string and tell the fabricators to weld the new rad to the that exact distance. I didn't do this and when the rad was welded back together it was say 5mm wider than the original and it only just fitted between the engine bay sides and the mounting holes.
Thanks guys for all the comments. I now have a copy of the bible and was reccomended to try a product called Kalimex. www.kalimex.co.uk which fills any leaks in the coolant system. 12 pounds for a small bottle, but money well spent as id did exactly what it said on the tin! within 3 minutes of getting up to temp the leak was sealed, and have done over a hundred miles at the weekend and everything is fine.
A lot cheaper than taking the rad out. Will keep an eye on it over the coming months to see if it remains sealed.
Regards Madasafrog
A lot cheaper than taking the rad out. Will keep an eye on it over the coming months to see if it remains sealed.

Regards Madasafrog
Had mine done about a month ago.
New Aluminium rad, and new hoses cost me just over £1k.
Was apparently a right ar5e to get out (as it has an A/C condensor on it aswell). The bolts had corroded and they had to cut the old fan shrouds out just to remove the old radiator. It was on all counts, a right pig of a job.
I'm glad I didn't try and attempt it myself.
New Aluminium rad, and new hoses cost me just over £1k.
Was apparently a right ar5e to get out (as it has an A/C condensor on it aswell). The bolts had corroded and they had to cut the old fan shrouds out just to remove the old radiator. It was on all counts, a right pig of a job.
I'm glad I didn't try and attempt it myself.
Gassing Station | Chimaera | Top of Page | What's New | My Stuff



