Door Card Removal
Door Card Removal
Author
Discussion

over_the_hill

Original Poster:

3,340 posts

277 months

Monday 30th August 2010
quotequote all
Sorry - search is down again.

I decided to take a look at my windows earlier as they can be a bit slow.

I tried unsuccessfully to get the drivers side door card off so I could have a closer look at the runners etc.

I have found the three bolts - 1) just in front of speaker, 2) roughly behind mirror switch, 3) roughly behind ciggie lighter.
I have also removed a self tapper from behind the ash tray. The leather surround trim still seems very tight and does not want to come away.

Am I missing something (almost certainly by the looks of it.)

allanb

309 posts

214 months

Monday 30th August 2010
quotequote all
There is a fourth nut further along the door car (past the ciggie lighter) that you need very thin arms to get to!!!

Other than that i think you have all of them!

Cheers

starmissed

29 posts

228 months

Monday 30th August 2010
quotequote all
This might help.


SILICONE KID

14,997 posts

262 months

Monday 30th August 2010
quotequote all
You need to have a lot of bottle and commit .Ram your arm in but sometimes your arm can get trapped..Replace with wing nuts but don`t forget a good selection of plasters confused

over_the_hill

Original Poster:

3,340 posts

277 months

Monday 30th August 2010
quotequote all
SILICONE KID said:
You need to have a lot of bottle and commit .Ram your arm in but sometimes your arm can get trapped..Replace with wing nuts but don`t forget a good selection of plasters confused
Oohh errr Misses, Are we talking about the same thing here ???

Thanks for the help all - especially the picture. I'm not that big with fairly wimpy arms and the one at the ciggie lighter was a reach. No. 4 could be "interesting" although it looks like I need to feel down the ridge from No. 3 and about the same distance as 2-3.