Lot of money but now running beautifully
Discussion
After starting a camshaft replacement myself at the end of last year and finding the camshaft bearings just starting to break up, I had to admit defeat amd have the car trailered away to APM to finish the work. (engine out - beyond me and my facilities). Several week later with new camshaft, camshaft bearings, main brgs, big end brgs, rockers, rockers shafts, followers, oil pump and thermostat, I had the car back.
After a week or so it started running lumpy on idle, but was due a 12000 mile service, and as I wanted a 4 wheel alignment anyway and a new radiator, I took it to Racing Green. They diagnosed a misfire probably due to head gasket.
David Batty did some tests and agreed, so he stripped the top end down (both sides as I didnt want to be coming back a few months later for the other side)and found a blow between cylinders 3 and 5 and the other bank had signs of the gasket deteriorating in a similar fashion. Apparently the bores looked very good as you could still see the honing marks (96000 miles) and the face of the block was unmarked. So a tiny head skim on each and all new gaskets and back together. The starter motor some times stuck, so whilst he had the car I had a new one put on.
Car now goes like it never did before ( I think a small blow may have been there for a long while)and it tickes over very smoothly.
Very pleased - especially now the rain has stopped.
After a week or so it started running lumpy on idle, but was due a 12000 mile service, and as I wanted a 4 wheel alignment anyway and a new radiator, I took it to Racing Green. They diagnosed a misfire probably due to head gasket.
David Batty did some tests and agreed, so he stripped the top end down (both sides as I didnt want to be coming back a few months later for the other side)and found a blow between cylinders 3 and 5 and the other bank had signs of the gasket deteriorating in a similar fashion. Apparently the bores looked very good as you could still see the honing marks (96000 miles) and the face of the block was unmarked. So a tiny head skim on each and all new gaskets and back together. The starter motor some times stuck, so whilst he had the car I had a new one put on.
Car now goes like it never did before ( I think a small blow may have been there for a long while)and it tickes over very smoothly.
Very pleased - especially now the rain has stopped.
Edited by WokingWedger on Tuesday 31st August 10:14
Gassing Station | Chimaera | Top of Page | What's New | My Stuff



