Chim Dashboard
Chim Dashboard
Author
Discussion

blackpoolrocket

Original Poster:

221 posts

227 months

Tuesday 31st August 2010
quotequote all
I truly hate the aluminium dash how easy is it to replace for the original dash?

Obviously what is the cost involved?

thx

Cider Andy

1,889 posts

256 months

Tuesday 31st August 2010
quotequote all
Replacement's not too difficult a job, as long as you have a replacement! Having the veneer replaced on existing dash panels will cost £200+; the rest is your time. If buying a replacement, don't forget there are two distinct versions. There's also the possibility that the holes for dials may have slightly different diameters among the same version.

And you'll need some good glue...

garfys v8s

1,257 posts

255 months

Tuesday 31st August 2010
quotequote all
i have had mine sprayed the same colour as the car and it looks superb.

RWDKurt

163 posts

277 months

Tuesday 31st August 2010
quotequote all
Had my dash covered in leather the same colour as the car. A bit fiddly - you really need new (bigger and better) warning lights between speedo and tacho, and new switches for the radio panel, but should age quite well and feels 'right' in a Brit sports car.

SILICONE KID

14,997 posts

262 months

Tuesday 31st August 2010
quotequote all
If you did airfix models as a kid,this job would be right up your streetlaugh

mash

122 posts

283 months

Wednesday 1st September 2010
quotequote all
I have purchased a second hand dash from here (thanks Glen) and am about to strip the old veneer off and replace with new. I think the main problem with the two materials is the expansion rate, so I will sandwich a thin neoprene or sorbothane strip between the metal and veneer.
Lots more on the Resource of course.