Where to get a cheap stepper motor
Discussion
Hi Naim,
Sorry for delay, I'm a 'new' member to this site and Ive just seen your question. Firstly, you do not need to find a 'cheap' alternative for your stepper. I've got a 95 Chim 4.0 which Ive owned for a year. My stepper packed in. After researching the fuel injection system used on these cars, realised that General Motors use the same system on some the older big block V8's Chevy's; AC Delco supply an identical stepper pn 217-437 which is about half the shelf price of TVR/ Rover. Mines been fitted for 6 months and it solved rough running problems completely. P.S, whilst your back there, change the vacuum pipe that runs off the back of the valve housing. They're generally split!!
I bought my valve from Adrian Boatwright in Rayne near Braintree Essex. They are an American Car Parts importer and really helpful; Look no further!! Hope this helps, Cheers, Paul, Essex.
Sorry for delay, I'm a 'new' member to this site and Ive just seen your question. Firstly, you do not need to find a 'cheap' alternative for your stepper. I've got a 95 Chim 4.0 which Ive owned for a year. My stepper packed in. After researching the fuel injection system used on these cars, realised that General Motors use the same system on some the older big block V8's Chevy's; AC Delco supply an identical stepper pn 217-437 which is about half the shelf price of TVR/ Rover. Mines been fitted for 6 months and it solved rough running problems completely. P.S, whilst your back there, change the vacuum pipe that runs off the back of the valve housing. They're generally split!!
I bought my valve from Adrian Boatwright in Rayne near Braintree Essex. They are an American Car Parts importer and really helpful; Look no further!! Hope this helps, Cheers, Paul, Essex.
Intermotor part number 14811 very good quality ,price around 40 pounds
http://www.suttonautofactors.co.uk/
http://www.suttonautofactors.co.uk/
Gassing Station | Chimaera | Top of Page | What's New | My Stuff




