Chassis tube and chassis paint suppliers?
Discussion
Can anyone suggest a source for 38mm (1.5") steel tube for use in an outrigger repair please?
Also what's the best paint to coat the new metal with? I've used POR 15 previously, but it only seems to work well over rust and doesn't stick well to new steel. Ideally I'd like to find something close to the light grey colour of the powdercoat.
Also what's the best paint to coat the new metal with? I've used POR 15 previously, but it only seems to work well over rust and doesn't stick well to new steel. Ideally I'd like to find something close to the light grey colour of the powdercoat.
Naybr said:
Can anyone suggest a source for 38mm (1.5") steel tube for use in an outrigger repair please?
Also what's the best paint to coat the new metal with? I've used POR 15 previously, but it only seems to work well over rust and doesn't stick well to new steel. Ideally I'd like to find something close to the light grey colour of the powdercoat.
That's interesting. Was just about to buy a load of POR15. Did you use Metal Ready or the Marine Clean on the new metal, or just POR15 straight onto it ?Also what's the best paint to coat the new metal with? I've used POR 15 previously, but it only seems to work well over rust and doesn't stick well to new steel. Ideally I'd like to find something close to the light grey colour of the powdercoat.
Matt
Yes - I'm using the Metal Ready, then POR 15, then their etch primer and then Hammerite (mixed white and black) to get the colour to match. Each one needs to dry/cure for 24 hours. What a palaver!
The POR is fine on the treated / ex-rusty areas, but it doesn't seem to be as good on shiny new steel, even after the Metal Ready. Maybe more abrasion is needed...?
It's sloppy old stuff to use as well. Hard to get a nice smooth finish.
Having said that, the finished result seems bulletproof!
The POR is fine on the treated / ex-rusty areas, but it doesn't seem to be as good on shiny new steel, even after the Metal Ready. Maybe more abrasion is needed...?
It's sloppy old stuff to use as well. Hard to get a nice smooth finish.
Having said that, the finished result seems bulletproof!
Gassing Station | Chimaera | Top of Page | What's New | My Stuff



