Spacers for 2500M

[rapidfrits]

Can anyone help me on following; my 2500M has spacers (30mm), but yesterday 1 stud passed away..Does anybody knows where to find these. This stud bolts on the original TR6 stud and is total 50mm. Need stud and chrome wheelnut...thanks!

[brittanytvr]

Hi,
long stud can been found on ebay or burton power etc with the correct size
https://www.burtonpower.com/product_main.aspx?dets...

[heightswitch]

rapidfrits said:

Can anyone help me on following; my 2500M has spacers (30mm), but yesterday 1 stud passed away..Does anybody knows where to find these. This stud bolts on the original TR6 stud and is total 50mm. Need stud and chrome wheelnut...thanks!

Frits that looks a horrible method of mounting a wheel and dangerous to me. If you are spacing 30mm which is a lot their will be a lot of force going through this arrangement. the studs you have just look like machine hex bar.

You can buy much longer Ford type wheelstuds which can be installed into the rear hub flange which will allow you to use a spacer in relative safety. That said 30mm seems quite a lot to me !! i would be looking at buying some better wheels with the correct backspacing as opposed to spacing in such a manner.

you can use M12 x 1.5 pitch but their are 2 different types available, one with a fatter shank and 1 which will pull into your existing hub.

I use merlin motorsport which carry both types.

N.

Edited by heightswitch on Thursday 2nd September 12:38