mk 4 golf window regulator/motor removal
Discussion
wongthecorrupter said:
I need to replace the window regulator /motor on my girlfriends mk 4 golf anniversary,any tips on door card removal and removong the regulator/motor.I have heard its a bit of an arse.cheers
I did one afew years back, was quite simple, I assume this is becuase of the infamous dropped window. If so no need to replace the motor, just get the repair kit, shoul dtake less than an hour all in.Sound like the cable is a bit F.U.C.T. and has derailed within the spool. New regulator assembly is fairly easy to do...
The trickiest bit is disconnecting the loom from the lock assy, and detatching the guard from it. You'll also need a pop-riveter.
Other than that, fairly straight forward. It's about 30-mins to an hour's labour for a pro; ask an indy how much they'll charge if you're a bit unsure.
The trickiest bit is disconnecting the loom from the lock assy, and detatching the guard from it. You'll also need a pop-riveter.
Other than that, fairly straight forward. It's about 30-mins to an hour's labour for a pro; ask an indy how much they'll charge if you're a bit unsure.
Get some silicon to seal up the bottom half of the metal assembly carrier (for want of a better description) against the door itself as the removal and refitting will have compromised the original seal and it could leak unless resealed. A small bead between the carrier and door when attaching to the door and then another bead after its been attached to the door round the outside as if you're sealing a bathroom sink edge.
Water needs to be kept inside the door so it can drain out of the door bottoms, if this isn't sealed up there'll be puddles in the rear footwell(s)
Water needs to be kept inside the door so it can drain out of the door bottoms, if this isn't sealed up there'll be puddles in the rear footwell(s)
Gassing Station | Audi, Seat, Skoda & VW | Top of Page | What's New | My Stuff


