What batterys do people have in there tasmins??
What batterys do people have in there tasmins??
Author
Discussion

greavesy7

Original Poster:

46 posts

194 months

Saturday 4th September 2010
quotequote all
i have had a look threw the forums and found sombody that said the halfords 072 fitted into there car i have tried that one and its not even close?


mrzigazaga

18,816 posts

195 months

Saturday 4th September 2010
quotequote all
Hi greavesy.. found some hope this helps.. www.motionbattery.co.uk or www.countybatteryservices.co.uk

Edited by mrzigazaga on Saturday 4th September 12:46

tempus

674 posts

231 months

Saturday 4th September 2010
quotequote all
What are you putting it in ?

greavesy7

Original Poster:

46 posts

194 months

Saturday 4th September 2010
quotequote all
2.8i all standard

jeff m

4,066 posts

288 months

Saturday 4th September 2010
quotequote all
Dimensions of my battery are H 8.5" L 10" W 6.5" 585 CCA
I use a ground disconnect on the Neg terminal as it is an occaisional driver.
It starts in April w/o a problem.
I assume the LHD batt compartment is the same size as the UK Tasmin
It would appear big enough to take the next size up !

mrzigazaga

18,816 posts

195 months

Saturday 4th September 2010
quotequote all
Didnt you av a look??[quote=mrzigazaga]Hi greavesy.. found some hope this helps.. www.motionbattery.co.uk or www.countybatteryservices.co.uk
The motionbattery looked a better site you got three to choose from..



Edited by mrzigazaga on Saturday 4th September 19:59

greavesy7

Original Poster:

46 posts

194 months

Saturday 4th September 2010
quotequote all
ive looked but they are too big the hole on my tasmin is only 140mm wide height or length isnt an issue

mrzigazaga

18,816 posts

195 months

Sunday 5th September 2010
quotequote all
Hi greavesy.. You say your battery hole is 140mm wide..you sure you looked on the motion battery site as they are as follows..VARTA 238Lx129Wx227H (mm).NUMAX 234x128x220. EXIDE 237x127x227..hope you find one.

greavesy7

Original Poster:

46 posts

194 months

Sunday 5th September 2010
quotequote all
the cranking amps are very low wt starting amps does your battery have.

convert

3,757 posts

248 months

Sunday 5th September 2010
quotequote all
Just fitted a 570cca type 069, approx 170x200x260mm. Fits just.

Campbell

2,500 posts

313 months

Sunday 5th September 2010
quotequote all
Ive got a Valta blue top 600 plus cranking amp battery in the SEAC, what a difference...had to tweek the bat to fit perfict

Have a look at this site for size and specs

http://performancebatteries.co.uk/battery_informat...

Cambelt

E Ponym

1,233 posts

297 months

Sunday 5th September 2010
quotequote all
I've got a Varta E12, 74Ah, 680 in my 390 - about half an inch spare clearance on width.

Russ

GinG15

501 posts

201 months

Wednesday 8th September 2010
quotequote all
in the front battery compartment of the 280 wedges batteries from japanese cars fit well.

mine is a 36Ah, so realy small, cranking speed is perfect, car always start on the button.

tempus

674 posts

231 months

Wednesday 8th September 2010
quotequote all
048 or 049 should do it,terminals are opposite way round but battery can be turned to suit.smile