Switched 12v feed for radio
Switched 12v feed for radio
Author
Discussion

miniman

Original Poster:

30,238 posts

293 months

Monday 13th September 2010
quotequote all
Is my Chim an oddity in that the radio is hooked up only to a permanent 12v (i.e. it doesn't turn off with the ignition)? Or is there a switched feed in there somewhere?

2 sMoKiN bArReLs

32,050 posts

266 months

Monday 13th September 2010
quotequote all
miniman said:
Is my Chim an oddity in that the radio is hooked up only to a permanent 12v (i.e. it doesn't turn off with the ignition)? Or is there a switched feed in there somewhere?
Standard is usually with the ignition. I had all mine changed by the dealer to permanent on.(so I could listen when 'er indoors is shopping biggrin)

miniman

Original Poster:

30,238 posts

293 months

Monday 13th September 2010
quotequote all
Nice one thanks. Does anyone know what colour the switched live should be?

TVR Beaver

2,874 posts

211 months

Monday 13th September 2010
quotequote all
you can mod the key switch so it comes on at 1 click... for some reason TVR cut this part off but it can be reversed... you need to mod the base moulding a tad also... there is a post on here i think of the exact details of how to do it... driving

Edited by TVR Beaver on Monday 13th September 20:19

Colin RedGriff

2,541 posts

288 months

Monday 13th September 2010
quotequote all
Assuming the wiring is the same as my 96 Griff 500 then there is a switched feed for the radio. My radio had a permanent feed but I converted it to switched when I changed it recently.

From memory I think it was green with a red tracer. Easy enough to check with a multi meter. There aren't that many wires to the radio once you've eliminated the aerial and the speaker wires.

Simon says

19,466 posts

252 months

Monday 13th September 2010
quotequote all

TVR Beaver

2,874 posts

211 months

Tuesday 14th September 2010
quotequote all
Thats the one.. Cheers Simon... Must print it out this time as I fancy doing this mod!!...