Dashboard lighting
Discussion
I seem to remember someone who converted their dash lights to LED etc..I am trying to decide whether to replace the vaneer with the same or try brushed aluminium etc...
I thought that the instruments could do with a freshen up as well
There seems to be a combination of bulbs
2w small on the clock
2w BA9 on other instruments
4w BA9 on speedo and tacho
Is it worth brightening things up as the instruments have allways looked dull in my opinion..
Cheers
I thought that the instruments could do with a freshen up as well
There seems to be a combination of bulbs
2w small on the clock
2w BA9 on other instruments
4w BA9 on speedo and tacho
Is it worth brightening things up as the instruments have allways looked dull in my opinion..
Cheers
My car's green. Utterly green. Green paintwork, green roof, green dash, green door panels, green centre console, green seats, green carpets. So I thought I might as well fit green LEDs...
Dashboard's not back in yet, so no photos available. If you have the post-'95(ish) dash with Caerbont gauges, it will probably need the same LEDs I fitted, all bought from eBay:
Rev counter LEDs
Other gauges LEDs
Fuel, temp, oil pressure, clock and speedo all took one LED; rev counter took two.
Dashboard's not back in yet, so no photos available. If you have the post-'95(ish) dash with Caerbont gauges, it will probably need the same LEDs I fitted, all bought from eBay:
Rev counter LEDs
Other gauges LEDs
Fuel, temp, oil pressure, clock and speedo all took one LED; rev counter took two.
My instruments are illiminated by blue led's (fitted by previous owner)
I did find the rev counter lights up nicely with a smooth, even blue ring around the edge of the dial but the speedo was very uneven. I think I've improved upon this by playing around with different led's (bought a selection off Ebay) and by cutting a second hole in back, speedo now has two lights same as rev counter.
Tried a photo but flash just "wipes out" glow from led's.
I did find the rev counter lights up nicely with a smooth, even blue ring around the edge of the dial but the speedo was very uneven. I think I've improved upon this by playing around with different led's (bought a selection off Ebay) and by cutting a second hole in back, speedo now has two lights same as rev counter.
Tried a photo but flash just "wipes out" glow from led's.
phillpot said:
My instruments are illiminated by blue led's (fitted by previous owner)
I did find the rev counter lights up nicely with a smooth, even blue ring around the edge of the dial but the speedo was very uneven. I think I've improved upon this by playing around with different led's (bought a selection off Ebay) and by cutting a second hole in back, speedo now has two lights same as rev counter.
Tried a photo but flash just "wipes out" glow from led's.
Turn the flash off and hold camera steady.I did find the rev counter lights up nicely with a smooth, even blue ring around the edge of the dial but the speedo was very uneven. I think I've improved upon this by playing around with different led's (bought a selection off Ebay) and by cutting a second hole in back, speedo now has two lights same as rev counter.
Tried a photo but flash just "wipes out" glow from led's.
Gassing Station | Chimaera | Top of Page | What's New | My Stuff




