AUDI RS4 B7 misfire/vibration HELP
Discussion
Help,
just bought a rs4 avant from main dealer and 2 test drives showed no apparent problems so bought the car.
Went to move the car Sunday night and noticed that it appeared to have a slight vibration/misfire that as you in crease the revs is very apparent from 1800 rpm upwards. As you rev through 1800-2200 you can feel the misfire/vibration throught the car.
Its back at the dealership, they have plugged it in and say that its not registering any faults. they are trying to hand it back "no fault found"
found a few refs on web to ecu remaps, plugs types
Anyone any experience of this problem with s4 b7
Steve W
just bought a rs4 avant from main dealer and 2 test drives showed no apparent problems so bought the car.
Went to move the car Sunday night and noticed that it appeared to have a slight vibration/misfire that as you in crease the revs is very apparent from 1800 rpm upwards. As you rev through 1800-2200 you can feel the misfire/vibration throught the car.
Its back at the dealership, they have plugged it in and say that its not registering any faults. they are trying to hand it back "no fault found"
found a few refs on web to ecu remaps, plugs types
Anyone any experience of this problem with s4 b7
Steve W
depending which ECU Audi map you have, the car runs very rich when cold, so normal.
if it is a problem ask for 090 to be loaded
of course, this is assuming the car has no faults and I am not just talking about what is extracted by vagcom
oh run it on super unleaded ...
if it is a problem ask for 090 to be loaded
of course, this is assuming the car has no faults and I am not just talking about what is extracted by vagcom
oh run it on super unleaded ...
Edited by Andyuk911 on Thursday 16th September 23:36
Gassing Station | Audi, Seat, Skoda & VW | Top of Page | What's New | My Stuff


