Rear Drive Shafts and Hubs

[Dave222]

Struggling to get hold of a workshop manual, can anyone tell me what the rear drive and hub assembly is off, looking at changing the bearings.
Thanks Dave

[daddysumo]

Dave222 said:

Struggling to get hold of a workshop manual, can anyone tell me what the rear drive and hub assembly is off, looking at changing the bearings.
Thanks Dave

Hmmm.... depends what model you have and when that model was built ?

[Dave222]

Model is the 2.5 GTO built in January 2002.
Dave

[daddysumo]

Dave222 said:

Model is the 2.5 GTO built in January 2002.
Dave

At a guess..... (the upright is obviously Noble part), the drive shafts might possibly be Cougar 2.5, if you have the
ABS type ring gear on the outer CV.It is a different Dia to the later ones by 1 or 2 mm.
The standard hubs are a Noble part, but can be swapped for a better standard ford part with new bearings to match.

This is based on my car (early 3R)so not the bible by any means !

Steve

[R0162]

follow this link then go to the online shop, then click on Noble, then scroll down to find wheel bearings and hubs.

http://www.petersmithsportscars.com/

[jdearden]

i used these on mine and were fine. i had the abs thing on old ones these dont have it but had no problems since

http://cgi.ebay.co.uk/FORD-MONDEO-MK3-DRIVESHAFT-B...