5 litres engine.where to buy and how much??
Discussion
You really want the plenum to sump as well as belts to clutch as a complete unit, there is quite a bit more in the 500 than just the stroked bottom end
Then you would probably want it all refreshed which adds to the cost, so you might want something like one of V8D's packages instead?
Remember there are a lot more strange parts in the 500 which may cause you 'problems' in remote locations? A supercharged 400 should be easy to get parts for, and the LR 8.35 comp bits may be even more common in your location than back here, if you want a bit more force.
Performance always comes with not just cost but greater complexity and risk.... Not a problem as long as you accept the possible little challenges
Then you would probably want it all refreshed which adds to the cost, so you might want something like one of V8D's packages instead?Remember there are a lot more strange parts in the 500 which may cause you 'problems' in remote locations? A supercharged 400 should be easy to get parts for, and the LR 8.35 comp bits may be even more common in your location than back here, if you want a bit more force.
Performance always comes with not just cost but greater complexity and risk.... Not a problem as long as you accept the possible little challenges

How about this?
http://www.pistonheads.com/sales/2052066.htm
I could go and look at it, it doesn't appear to be far from me..
Ant. said:
How about this?
http://www.pistonheads.com/sales/2052066.htm
I could go and look at it, it doesn't appear to be far from me..
Yes please do come look at it http://www.pistonheads.com/sales/2052066.htm
I could go and look at it, it doesn't appear to be far from me..
If you want any further info on this engine, it was previously owned by nigel on here so the history/mileage verification can be confirmed.Only reason is purely to fact that I dont have the car anymore

Gassing Station | Chimaera | Top of Page | What's New | My Stuff


