Knocking from inside my petrol tank ??
Discussion
Occasionally (recently) I get the odd knocking from the boot of the car, sounds like a marble or something rolling about and knocking on a bare body panel. So I just stuck my head in the boot and rocked the car, sure enough the noise seems to be coming from inside the petrol tank. I assume therefore it's got something to do with a float or something that measures the fuel level. Can anyone enlighten me? has something dropped off? the fuel gauge is still working (in its usually vague way) or is it normal?
Thanks
Thanks
haircutmike said:
I had this a couple of years ago, twas the baffle plate that had become unattached!
It was surfing across the bottom of the tank.
Bought one from the classifieds for £25.00 and replaced it.
Still got the old tank in the garage, FOC complete with loose baffle
Had same thing with both baffles lying in the bottom. Unfortunately for me a tank was £250 from a TVR breakers.It was surfing across the bottom of the tank.
Bought one from the classifieds for £25.00 and replaced it.
Still got the old tank in the garage, FOC complete with loose baffle

I assumed being tig welded alli, it would be difficult to fix.
Edited by dogbucket on Wednesday 22 September 08:43
Before you buy a new tank it is well worth checking the sender.
When removed you will see the float on the end of the wand is facing to the back of the tank.
Because the tank slopes at the back the float runs very close to it.
If the float touches the tank it will create a noise.
Its extremely easy to remove the float from the wand and fit it so the longer end faces the other way.
All this only takes 10 minutes so its worth a try.
When removed you will see the float on the end of the wand is facing to the back of the tank.
Because the tank slopes at the back the float runs very close to it.
If the float touches the tank it will create a noise.
Its extremely easy to remove the float from the wand and fit it so the longer end faces the other way.
All this only takes 10 minutes so its worth a try.
Mikeoupe said:
Thanks, I will try that. Before I start peeling carpet back could you point me in the direction of the sender? Is it on the top face of the tank?
Yes Mike, its on the top of the tank at the opposite end to the filler neck.Just peel back the carpet, remove the wiring, undo the Philips retaining screws and the complete sender unit will draw out of the tank.
The end of the wand is shaped in such a way as the plastic float clips into it.
Remove the float, turn it so the longer end faces the rear of the car and see if this solves the problem.
In truth its more likely to be a loose baffle, but its so easy to reverse the float you may as well try it before you go spending.
Gassing Station | Chimaera | Top of Page | What's New | My Stuff


