new coil and dizzy
new coil and dizzy
Author
Discussion

Ozmira

Original Poster:

1,175 posts

220 months

Thursday 23rd September 2010
quotequote all
im after a new coil and dizzy for the chim (500) but dont really know which ones to get. are there standard parts and upgraded parts? which is best to get and is it as simple to fit as it looks or will it take a bit of playing around. ive checked on some parts websites and they seem only to sell standard parts. ultimately it dosent matter if it stays standard im just after a new coil and dizzy.

any help would be great Shaun.

SILICONE KID

14,997 posts

262 months

Thursday 23rd September 2010
quotequote all
I have a dizzy removed from a low mileage car with the cap which is only done a few thousand miles.

Ozmira

Original Poster:

1,175 posts

220 months

Thursday 23rd September 2010
quotequote all
thanks for the offer but nottingham is a bit far to travel for that part.

SILICONE KID

14,997 posts

262 months

Friday 24th September 2010
quotequote all
I can post 40 quid plus postage.

Edited by SILICONE KID on Friday 24th September 12:45

blitzracing

6,422 posts

251 months

Friday 24th September 2010
quotequote all
Ozmira said:
im after a new coil and dizzy for the chim (500) but dont really know which ones to get. are there standard parts and upgraded parts? which is best to get and is it as simple to fit as it looks or will it take a bit of playing around. ive checked on some parts websites and they seem only to sell standard parts. ultimately it dosent matter if it stays standard im just after a new coil and dizzy.

any help would be great Shaun.
All bog standard range Rover / Land rover parts. Just be aware of some of the low cost pattern parts out there however.

Just a second thought, there is some discussions if TVR changed the springs and wieghts in the dizzy ( I dont know if they did) so you might need to swap these bits over if they are different. Mind you it would be better to spend your money on mapped ignition system and coil packs rather than replace outdated stuff with new bits.

Edited by blitzracing on Friday 24th September 14:52

Ozmira

Original Poster:

1,175 posts

220 months

Saturday 25th September 2010
quotequote all
ive been doing some looking on this and now am not sure as to weather or not to get the lucas or bosch coil. any help please.....confused

bigdods

7,175 posts

258 months

Saturday 25th September 2010
quotequote all
Ozmira said:
ive been doing some looking on this and now am not sure as to weather or not to get the lucas or bosch coil. any help please.....confused
My coil was replaced 5 years ago with a Bosch, its still going strong so I can recommend it.

TVR Beaver

2,874 posts

211 months

Sunday 26th September 2010
quotequote all
[quote=blitzracing
Just a second thought, there is some discussions if TVR changed the springs and wieghts in the dizzy ( I dont know if they did) so you might need to swap these bits over if they are different. Mind you it would be better to spend your money on mapped ignition system and coil packs rather than replace outdated stuff with new bits.

Edited by blitzracing on Friday 24th September 14:52

[/quote]

Mark... is there a unit out there where you can do this but keep the 14cux?... from thoes I've looked at so far they all tend to go with a new ECU?... driving

blitzracing

6,422 posts

251 months

anonymous-user

85 months

Sunday 26th September 2010
quotequote all
I am also interested in this however isn't this kit for 4 cylinder engines ?
Am I reading it correctly.

TVR Beaver

2,874 posts

211 months

Sunday 26th September 2010
quotequote all
blitzracing said:
Interesting... and cheaper than a new dizzy.... and looks like it ties up with the MS ECU's if you want to go further... I did look for the MJ control unit before but didn't find this page for some reason??... I think a mapped spark would give a good improvement over std?.. just wonder what control you have and can you have a couple of settings?..
Reason I ask is I've played about with the vac tapping on the plenum and it does make a differance... closer to the butterfy gets the spark advanced quicker so better for slow running and reduced shunting... 2mm from the butterfly and it goes a lot better but will bounce about a bit...
Any idea if you could have 2 maps?.. do they work in the same way as an ECU with regards to mapping?


I think the price £289 is the lower one,,, no thats £246... it's £331 for the V8... I'm sure it said £289 first time I looked??????? do they have web site issues?? Or has it JUST gone up by £42!!


driving







Edited by TVR Beaver on Sunday 26th September 15:58

blitzracing

6,422 posts

251 months

Sunday 26th September 2010
quotequote all
Got me at it now, misread the page. frown Its nearer £400 for the V8, but I know when I looked at this previously I reckon you could source the bits from the USA at lot cheaper (like the coil packs and Ford trigger units) if you want to spend the time.

dog man

552 posts

233 months

Monday 27th September 2010
quotequote all
I would have though definitely Tvr altered the weights in the distributor because the cam will be different to the standard rr item. Why the need for a new distributor?

SILICONE KID

14,997 posts

262 months

Monday 27th September 2010
quotequote all
so does anyone want my Dizzy and new OE cap..plus a Gizza splitter.







Edited by SILICONE KID on Monday 27th September 16:31