Effing Golfs II
Effing Golfs II
Author
Discussion

red griff roger

Original Poster:

432 posts

248 months

Friday 24th September 2010
quotequote all
As promised, a quick update. Car is back from having the chassis sorted. The outriggers turned out to definately need replacing, and the slightly bent bit at the front has been replaced. All got cleaned up and waxoiled.

The nose is now in position and about to be glassed in prior to a complete respray. After that it is putting all of the bits back on. Unfortuantely, as the outside is going to look so smart, I have had my arm twisted to replace the carpets (which were truly fubard), and put in some better seats. More piccys to follow.





Edited by red griff roger on Friday 24th September 13:26

MPoxon

5,329 posts

202 months

Friday 1st October 2010
quotequote all
Looking good Roger, be sure sure to keep us all updated. smile

Which seats did you go for in the end?

ESDavey

713 posts

248 months

Monday 4th October 2010
quotequote all
and treat yourself to a large rubber grommet for your gearbox !

rigga

8,806 posts

230 months

Monday 4th October 2010
quotequote all
Would think about 80% of cars have the inspection hole cover missing from the ammount of comments on here about them,not an issue.

jimed

1,508 posts

235 months

Tuesday 5th October 2010
quotequote all
A comment re the bung issue - my car had a report from a previous service by a well known agent saying clutch squeeks which could be the fingers starting to fail. This was before I bought it so as clutch ws not that old I had a word with my local people (X Works) who told me that with the bung missing the clutch gets damp in and that is what makes it sqeek more often than not. It hasn't been an issue and all is well (hope not famous last words ...) but I do now have a bung fitted which the guys have also put sealant round to stop it coming off.
Jim

red griff roger

Original Poster:

432 posts

248 months

Wednesday 6th October 2010
quotequote all
Didn't know there was supposed to be a bung. Is it the same part number as the front splitter?