Total stations that add a penny...
Total stations that add a penny...
Author
Discussion

uncinquesei

Original Poster:

918 posts

206 months

Friday 24th September 2010
quotequote all
Friend of mine just posted on Facebook about a total station that adds a penny however careful he is when filling up. This reminded me of a Total station that i used to use (because of work) that also added a penny to the total (pardon the pun). When i asked about it they said it must be me...
I subsequently googled this and came across one of those sites where people review things (like you'd check the reviews before going to buy a paper...) and a total station came up again with the adding a penny thing...
Anyone else noticed this and put it down to being slightly careless with the trigger?

scratchchin

AreseV6

241 posts

196 months

Friday 24th September 2010
quotequote all
This happened to me at the Total on Tong Road Leeds no less than a week ago so there may well be truth in the matter

Tunku

7,703 posts

257 months

Friday 24th September 2010
quotequote all
Happened to me at a Jet station, and another station I can't remember which company, possibly Tesco. I put it down to old equipment being pushed too hard with a big petrol price. The Jet station has since turned down the speed of delivery and no longer rolls round a penny, but it now takes longer to fill up.
So, it could just be old equipment delivering fuel at a higher price than it was designed to. If you see what I mean.

Shamu

147 posts

209 months

Friday 24th September 2010
quotequote all
Tesco's Total where i used to work always did this, but only on about half of the pumps.

MattOz

4,020 posts

293 months

Friday 24th September 2010
quotequote all
Not as bad as one recently where I managed to get 63.75 litres into a 63 litre tank that still had 70 miles showing on the range. Mmmmm!

pits

6,704 posts

219 months

Friday 24th September 2010
quotequote all
Local one to me used to do it alot, then a sticker appeared on the machines saying "This machine has been calibrated and tested by local government weights and measures team"

Doesn't add a penny on any more, I suggest a call to weights and measures wink

Defcon5

6,466 posts

220 months

Friday 24th September 2010
quotequote all
MattOz said:
Not as bad as one recently where I managed to get 63.75 litres into a 63 litre tank that still had 70 miles showing on the range. Mmmmm!
I have fit 40 litres into my 33l tank before!

Mars

10,095 posts

243 months

Friday 24th September 2010
quotequote all
MattOz said:
Not as bad as one recently where I managed to get 63.75 litres into a 63 litre tank that still had 70 miles showing on the range. Mmmmm!
The quoted volume of your tank probably precludes the filler neck, which could potentially hold a couple of litres depending on your car.

Raverbaby

896 posts

215 months

Friday 24th September 2010
quotequote all
Mars said:
MattOz said:
Not as bad as one recently where I managed to get 63.75 litres into a 63 litre tank that still had 70 miles showing on the range. Mmmmm!
The quoted volume of your tank probably precludes the filler neck, which could potentially hold a couple of litres depending on your car.
possibly a reserve tank too?

MattOz

4,020 posts

293 months

Friday 24th September 2010
quotequote all
Raverbaby said:
Mars said:
MattOz said:
Not as bad as one recently where I managed to get 63.75 litres into a 63 litre tank that still had 70 miles showing on the range. Mmmmm!
The quoted volume of your tank probably precludes the filler neck, which could potentially hold a couple of litres depending on your car.
possibly a reserve tank too?
Both the above are plausible, but I still had almost 2 gallons left in a 13 gallon tank and managed to fill up with over 13 gallons. Still iffy IMHO.

wijit

1,512 posts

204 months

Friday 24th September 2010
quotequote all
The pumps run on flow meters which basically spin as liquid passes through them and counts the number of times it spins in order to measure how much fuel you have bought. These are far from reliable though as, if the flow of liquid is too rapid or if the pressure is too great they can spin more than they should. Effectively overtaking the actual amount of fuel passing through.
The reason I'm telling you this (and I apologise if you already knew), is that by simply loosening a small allen screw you can make the "spinner" more loose and "encourage" it to give a falsely high reading.

PHmember

2,487 posts

200 months

Friday 24th September 2010
quotequote all
If you are that concerned then you need to speak to Weights & Measures, they will gladly test pumps & they have very strict tolerances on how accurate the pumps are. W&M also do regular checks at all fuel stations regardless of whether there has been a complaint or not.

Kinky

39,943 posts

298 months

Friday 24th September 2010
quotequote all
There was a thread on this very same subject a few days ago.

MGZRod

8,176 posts

205 months

Friday 24th September 2010
quotequote all
Kinky said:
There was a thread on this very same subject a few days ago.
Link then? hehe

Kinky

39,943 posts

298 months

Friday 24th September 2010
quotequote all
MGZRod said:
Kinky said:
There was a thread on this very same subject a few days ago.
Link then? hehe
Link?

Pah. I've got arse to scratch smile