exhaust manifolds 4lt chim
Discussion
Just trying to change the exhaust manifolds on my 4lt chim 1996 as they are cracked, i have managed to get a pair of another '96. Excuse my ignorance but is the catalyst in the manifolds or the y piece. The manifolds i want to put on seen to have a honeycomb type material inside, the ones i have just taken off havn't got anything inside. If i put these on is it going to affect the performance, or have i got the wrong ones for my car??? Any infomation you can give would be greatly appreciated.
I don't know all this answer but some of it.
The manifolds on may car 99, do have cats in them , a honeycombed type set up. Think this is the pre cat. I also think there is some in the y piece also, main cat.
When mine failed I got them welded up and then water tested, they are OK right now, but I have only done about 300 miles since and I do notice when I rev the engine it all looks to move a bit, so I am not sure how long it will last.
The manifolds on may car 99, do have cats in them , a honeycombed type set up. Think this is the pre cat. I also think there is some in the y piece also, main cat.
When mine failed I got them welded up and then water tested, they are OK right now, but I have only done about 300 miles since and I do notice when I rev the engine it all looks to move a bit, so I am not sure how long it will last.
Hi,
There are cats as standard in both of the manifolds (precats) then the big one in the Y Piece.
Sounds like someone has removed the pre-cats already on your old manifolds. Its easy enough to do just bash them out one way or another. If you leave them in it will sound quieter. And probably have a higher under bonnet temperature. Lots of reports of them breaking down as well.
In my opinion get rid of the pre-cats, just like your old ones
There are cats as standard in both of the manifolds (precats) then the big one in the Y Piece.
Sounds like someone has removed the pre-cats already on your old manifolds. Its easy enough to do just bash them out one way or another. If you leave them in it will sound quieter. And probably have a higher under bonnet temperature. Lots of reports of them breaking down as well.
In my opinion get rid of the pre-cats, just like your old ones

I replaced the engine mounts about six weeks ago as they had split,guess they had already cracked the manifold.If anybody is interested i pressure tested my exhaust system by stuffing a tennis ball in each of the exhaust pipes,in one tennis ball i made two holes opposite each other in one i fitted a stainless tyre valve connected it to an air line on alow pressure and found my leeks.Dont know if anybody has tried this before but it worked realy well.
just a quick question while on the subject of manifolds, when refitting is it worth using s/s bolts you know the ones, always on ebay at what seem like a reasonable price. the reason i ask is because i seem to remember reading (on this forum i think) that they could have a reaction with the ali block or something to do with not getting the correct torque,am i better keeping to the standard items? thoughts anybody?
Gassing Station | Chimaera | Top of Page | What's New | My Stuff



t out