Pulley damper
Pulley damper
Author
Discussion

Teetertank

Original Poster:

358 posts

218 months

Tuesday 28th September 2010
quotequote all
Need a new harmonic damper pretty urgently.

The one I have has cracked down the keyway, and looks like it's been slopping about all over the place.

Does anyone know the Landrover part no. for this item please?

Car is 1997, 5.0 serpentine.

The part the "looks" the same is ERR3442P - hope someone can confirm or advise otherwise.

Cheers.

Ant.

5,254 posts

312 months

Tuesday 28th September 2010
quotequote all
Have one at home, pm me your number.

stefan1200

98 posts

268 months

Tuesday 28th September 2010
quotequote all
These engines are balanced externally through the crankshaft damper, so each engine has its own specific damper.

I had the same problem on my 500. Had to send the old damper to TVR Power to get the new one balanced against the original.

Teetertank

Original Poster:

358 posts

218 months

Tuesday 28th September 2010
quotequote all
stefan1200 said:
These engines are balanced externally through the crankshaft damper, so each engine has its own specific damper.

I had the same problem on my 500. Had to send the old damper to TVR Power to get the new one balanced against the original.
So the theory goes.

But the harmonic balancer is balanced itself. The plate which TVR weld metal or studding to is what makes the pulley balanced to the engine. So if you keep the original balance plate with the unique identifier on, then you should be able to maintain the balance if you are using a "zero" balanced pulley/damper, with the original balance plate retained.