how reliable is a 5 litres engine??
Discussion
guys as u know i am looking to get more power from my little CHIMAERA.so back to square one.supercharge???as most of u told me i ll want power after a while.5 litres easy to mod to make it a monster(just concern about reliability)my 4 litres is one of the most reliable engine i own.or the LS1 option.no sure how hard it ll be to fit one of this.i dont want to spoil the handling.tks for ur comments.please no comments about me not making up my mind ahahah i know that already
I think it depends on if you mean the TVR 500 engine or a properly built 5L from someone like V8D.
Personally Id recommend going for a properly built engine from Rob at V8Developments, Im going for the 5.4 as I believe thats the best engine as far as value and power goes. These are around 350+ BHP, my TVR 500 engine gave me 270BHP, which is poor in comparison. I was going to add a blower to the 500 but as it is a weak engine I feel that replacing the engine with a stronger unit and getting the same power I would have acheived but without the blower is the better option. Then Im going to supercharge the 5.4 when Im bored with it, if Im still bored after that I will have to start looking into rocket propulsion,
Phil
Personally Id recommend going for a properly built engine from Rob at V8Developments, Im going for the 5.4 as I believe thats the best engine as far as value and power goes. These are around 350+ BHP, my TVR 500 engine gave me 270BHP, which is poor in comparison. I was going to add a blower to the 500 but as it is a weak engine I feel that replacing the engine with a stronger unit and getting the same power I would have acheived but without the blower is the better option. Then Im going to supercharge the 5.4 when Im bored with it, if Im still bored after that I will have to start looking into rocket propulsion,
Phil
weak engine wow so bad???really mhmh what is the problem with the 5 litres engine???the more i look at it the more i like the LS1.out of the boxe 340hp super reliable and a lot of after market parts.and the price for a full engine plus all i need at less than 3k usd.mhmh but a well build V8 from the land of TVRs sounds good too.i would really like to keep a TVR engine in it.but want the same reliability of my 4 litres
The major problem you will face is not how reliable the engine is but how reliable the install will be. The 5 litre engines are fine but the more power you want the more the engine has to be strengthened/upgraded to cope with the additional power. In Maylasia there is the added problem of heat and high ambient temps which means that what ever route you take, you will need to tackle cooling to ensure that the engine stays within operating spec. Supercharged engines are even more susceptible to heat especially with air charge temps.
As for an LS1 coversion... budget around £17 to 25K - it is a lot or work as virtually everything has to be replaced and there are a lot of chassis mods etc to do so. The engine is cheap but the overall cost is high in this case.
The first thing to decide is how much do you want to spend. Then double it to cover the installation and other costs that will need to be added to ensure that the car is reliable.
A rough rule of thumb for RV8 power upgrades is around £100 per bhp.
Perhaps the most important thing to sort out is who is going to do the work and maintain the car locally. You could have the best engine but unless the install and maintainance is right, it could end up being a real dog.
As for an LS1 coversion... budget around £17 to 25K - it is a lot or work as virtually everything has to be replaced and there are a lot of chassis mods etc to do so. The engine is cheap but the overall cost is high in this case.
The first thing to decide is how much do you want to spend. Then double it to cover the installation and other costs that will need to be added to ensure that the car is reliable.
A rough rule of thumb for RV8 power upgrades is around £100 per bhp.
Perhaps the most important thing to sort out is who is going to do the work and maintain the car locally. You could have the best engine but unless the install and maintainance is right, it could end up being a real dog.
The major problem you will face is not how reliable the engine is but how reliable the install will be. The 5 litre engines are fine but the more power you want the more the engine has to be strengthened/upgraded to cope with the additional power. In Maylasia there is the added problem of heat and high ambient temps which means that what ever route you take, you will need to tackle cooling to ensure that the engine stays within operating spec. Supercharged engines are even more susceptible to heat especially with air charge temps.
As for an LS1 coversion... budget around £17 to 25K - it is a lot or work as virtually everything has to be replaced and there are a lot of chassis mods etc to do so. The engine is cheap but the overall cost is high in this case.
The first thing to decide is how much do you want to spend. Then double it to cover the installation and other costs that will need to be added to ensure that the car is reliable.
A rough rule of thumb for RV8 power upgrades is around £100 per bhp.
Perhaps the most important thing to sort out is who is going to do the work and maintain the car locally. You could have the best engine but unless the install and maintainance is right, it could end up being a real dog.
As for an LS1 coversion... budget around £17 to 25K - it is a lot or work as virtually everything has to be replaced and there are a lot of chassis mods etc to do so. The engine is cheap but the overall cost is high in this case.
The first thing to decide is how much do you want to spend. Then double it to cover the installation and other costs that will need to be added to ensure that the car is reliable.
A rough rule of thumb for RV8 power upgrades is around £100 per bhp.
Perhaps the most important thing to sort out is who is going to do the work and maintain the car locally. You could have the best engine but unless the install and maintainance is right, it could end up being a real dog.
The TVR engines are quite reliable. Probably a bit of 'on-siding' made earlier post sound a little harsh
. You'll get good & bad examples from everywhere which PH N&S rules actually mediate very well IMHO. I know of stories of individuals that think they got rubbish from Eales, V8D, TVR... just facts of life, you can take them to heart if you want but it is a bit like 'cutting off your nose to spite your face' in the scheme of things IYSWIM.
There are pretty good engine sources in Oz/NZ which may be worth looking at based on your geographical location? Quite a few of the UK RV8 gurus seem to have some Kiwi connection strangely arriving here via the Nascar route I think?
. You'll get good & bad examples from everywhere which PH N&S rules actually mediate very well IMHO. I know of stories of individuals that think they got rubbish from Eales, V8D, TVR... just facts of life, you can take them to heart if you want but it is a bit like 'cutting off your nose to spite your face' in the scheme of things IYSWIM.There are pretty good engine sources in Oz/NZ which may be worth looking at based on your geographical location? Quite a few of the UK RV8 gurus seem to have some Kiwi connection strangely arriving here via the Nascar route I think?

Well speaking personally and having owned my 500 now for 6 years - the engine has been absolutely reliable. More so than other ancillaries!
There are scare stories about the 500 thin wall bores etc, but this is ususally muted by 400 owners to be honest.
If you are sensible & replace perishible parts (the cars are upto 15 yrs old now!) ie coil, leads etc every few years and service it correctly with decent oil at regular intervals and follow up normal operating procedures, i can't see why this engine cannot be very reliable because of its performance.
I've never come across too many people on these forums complaining about releiablity with the 500 either. Its already an uprated engine and can be improved further if you really need more power to a limit of course.
There are scare stories about the 500 thin wall bores etc, but this is ususally muted by 400 owners to be honest.
If you are sensible & replace perishible parts (the cars are upto 15 yrs old now!) ie coil, leads etc every few years and service it correctly with decent oil at regular intervals and follow up normal operating procedures, i can't see why this engine cannot be very reliable because of its performance.
I've never come across too many people on these forums complaining about releiablity with the 500 either. Its already an uprated engine and can be improved further if you really need more power to a limit of course.
I think the first thing Dennis has to decide is what performance he will be happy with. For example 0-60 and 0-100 numbers.
Then we will know the bhp and torque required and can give the best advice on engine choice etc.
It seems Dennis is an expert an opening cans of worms and needs to go back to square 1 IMO.
Then we will know the bhp and torque required and can give the best advice on engine choice etc.
It seems Dennis is an expert an opening cans of worms and needs to go back to square 1 IMO.
Andy JB said:
There are scare stories about the 500 thin wall bores etc, but this is ususally muted by 400 owners to be honest.
Total utter rubbish! 500 is stroked - the block & bores are exactly the same as the 400, 430 & 4.6.. It's other RV8 folks than TVR that farted around with bore / stroke sizes for strange capacities.I would say that the 500 is more reliable.
Less revs to drive very quick, rare for me to see more than 5000rpm.
Less gear changes, less wear and tear on drive train
The only downside I would say is the increased underhood temps which do tend to cook the electrics.
Just remember that these engines are never going to make big numbers in the bhp department, its all about the grunt.
Andy
Less revs to drive very quick, rare for me to see more than 5000rpm.
Less gear changes, less wear and tear on drive train
The only downside I would say is the increased underhood temps which do tend to cook the electrics.
Just remember that these engines are never going to make big numbers in the bhp department, its all about the grunt.
Andy
dbv8 said:
I think the first thing Dennis has to decide is what performance he will be happy with. For example 0-60 and 0-100 numbers.
Then we will know the bhp and torque required and can give the best advice on engine choice etc.
It seems Dennis is an expert an opening cans of worms and needs to go back to square 1 IMO.
Then we will know the bhp and torque required and can give the best advice on engine choice etc.
It seems Dennis is an expert an opening cans of worms and needs to go back to square 1 IMO.
please guys try to forgive me and understand me.i live in Malaysia here nobody modify V8s.u guys are from the kitcars country and V8s gurus.here they play with Japs cars .they dont even have any idea what car is it.anyway i need to make up my mind but i want to be sure that spend my money wisely and be happy with the result.i am looking at a real 280hp to 300hp and would be nice a 4sec for the 0 to 60.if i can affort it this year than i ll try to bring back my 4 litres as close as TVR quoted it(240hp).no long ago i found out that i was pretty far from this number.so i think by changing the cam and others mods i should be happy till i can get a good 5 litres enine.my mechanics are ex ASIA TVR SPORT stuff.they were building CHIMAERAS for the asia market so they know the car from A to Z but they dont modify them.only around 10 units here and belong to old men who just like to drive them once a month.not me i drive mine everyday.i just want to give her the power she deserve thats all.so please all ur help will be welcome.this is my dyno print,
Ok to run 0-60 near 4 seconds then at least 300 bhp with good low down torque would be required. Realistically 0-60 in 4.3 and 0-100 in 11.
A good 5 ltr should provide this easily enough and would be the easiest option just to swap and tune.
Take no notice of unreliability rumours. A well serviced rover v8 at this power level should give you no major problems for many miles.
A good 5 ltr should provide this easily enough and would be the easiest option just to swap and tune.
Take no notice of unreliability rumours. A well serviced rover v8 at this power level should give you no major problems for many miles.
With your planned ECU upgrade contemplate the 450, this having the potential for equal to or more power that the 5.0. The 450 is free revving and will easily rev to 6250+ rpm, where as 5.0 is restricted to around 5.9-6k MAX. I believe the 450 is a stronger engine incorporating cross bolting of the block,and a much lower compression ratio than 5.0 builds, this being well suited to the SC upgrade. Nick Simpson has an SC450 rocket ship with emerald ECU. His car is bloody quick having in excess of 400bhp, and he uses it on the track quite often and is a promissing contender for the Tuscan Challenge this year with his race Tuscan, ( his not sure which will be quickest). Theres a lot to be said for the 450 and in my opinion this engine is the best and vastly underrated, many thinking that biggest is best always going for the 5.0 with high compression. And the plus is you would only need a short engine to convert from 4.0 to 4.5 using many of your current bits. Even complete engines tend to be cheaper than 5.0. Worth a thought although straying from your question relating to 5.0 engines.
5.0 engines, a tvr 500 engine does has a few weak points, depending on how you drive the car and how you look after your engine etc..., the weak points are cranks can snap if the rpm is abused often, the heads can go pourous, if the engine has been overheated regually then the liners can go pourous nothing to do with tvr just the rover v8 engine, The very short conrods to piston angle will wear pistons out quicker (again if well maintained with good oil shouldnt really be a problem).
All this being said it is a good engine if you buy a good one!, the later cross bolted ones are much better in the fact the cranks are a lot stronger. i guess it is going to boil down to your budget though, if you are going to buy a second hand engine which go for around 2000-3500 for a complete unit, you dont really no what you are buying, The bhp figures you mentioned earlier 280-300bhp is certainly availible using a 4.6 engine, i know it hard to say but regardless of horsepower you want it mostly boils down to your budget you are willing to spend, and the driveabilltiy you want.
All this being said it is a good engine if you buy a good one!, the later cross bolted ones are much better in the fact the cranks are a lot stronger. i guess it is going to boil down to your budget though, if you are going to buy a second hand engine which go for around 2000-3500 for a complete unit, you dont really no what you are buying, The bhp figures you mentioned earlier 280-300bhp is certainly availible using a 4.6 engine, i know it hard to say but regardless of horsepower you want it mostly boils down to your budget you are willing to spend, and the driveabilltiy you want.
Gassing Station | Chimaera | Top of Page | What's New | My Stuff


