'Chimaera in "Rusty Chassis" shocker'
'Chimaera in "Rusty Chassis" shocker'
Author
Discussion

drive2tractors

Original Poster:

488 posts

295 months

Wednesday 29th September 2010
quotequote all
After a successful body lift it was time to inspect the damage:


OUCH



OUCH



DOUBLE OUCH



EXTRA DOUBLE OUCH



So, a bit disturbed by the rot on the center chassis box. My gut feeling is that I am going to have to go for a replacement chassis, if there is that much damage then how bad would the rest of it be in a few years even if I did repair it well?
Has anyone successfully repaired the main box sections?
d2t.

Alexdaredevilz

5,697 posts

210 months

Wednesday 29th September 2010
quotequote all
Id get that acid dipped or bead blasted, and take to a professional welder im sure they can repair that with no problem

Seems like you caught it at the right time

neal1980

2,585 posts

270 months

Wednesday 29th September 2010
quotequote all
Didnt expect the center to go as well that easily....The outriggers had just started to go on mine 1996.

Now your this far might as well go to town! I started off with outriggers then got carried away!




itiejim

1,822 posts

236 months

Wednesday 29th September 2010
quotequote all
That is frightening. Anything CAN be repaired - but that'll be like welding lace curtains.

Definitely a "bin it and replace it" job imho.

drive2tractors

Original Poster:

488 posts

295 months

Wednesday 29th September 2010
quotequote all
Yes, looks a bit grim I'm afraid. I have some feelers out for a new chassis.
d2t.

dbv8

8,676 posts

251 months

Wednesday 29th September 2010
quotequote all
Didnt i see a refurbished 1 on fleabay for £1200?

Ummm here it is.... http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&am...

Maybe an option.

I think yours is repairable however.
Get it blasted and let a fabricator replace the outriggers and repair that hole. I bet thats a 1 off in the main frame.

I spent £200 on blasting, £500 to the fabricators, and about £100 on POR15 products.

Naybr

209 posts

197 months

Thursday 30th September 2010
quotequote all
Well clearly the outiggers are shot - but you knew that before you started. The hole in the main frame is in a usual place and could be fairly easily repaired. Are there any other spots like that?

drive2tractors

Original Poster:

488 posts

295 months

Thursday 30th September 2010
quotequote all
Naybr said:
Well clearly the outiggers are shot - but you knew that before you started. The hole in the main frame is in a usual place and could be fairly easily repaired. Are there any other spots like that?
Same place the other side and more worryingly everywhere something is welded to the square box. I'm hoping to chat today to someone who may be able to help having seen these photos.

pk500

1,975 posts

243 months

Friday 1st October 2010
quotequote all
i bought the steel tube and flat plate and fabricated my own outriggers cost about £100 in materials but spent another 3k on other parts to rebuild the engine and running gear & suspension

quattrophenia

1,103 posts

229 months

Saturday 2nd October 2010
quotequote all
neal1980 said:
Didnt expect the center to go as well that easily....The outriggers had just started to go on mine 1996.

Now your this far might as well go to town! I started off with outriggers then got carried away!



Great stuff that man. Had you ever rebuilt a car before or was this just something you started so had to finish?
How long did it take to strip, repair and put back together?
That a new chassis or just a refurb?