How much to replace a cam?
How much to replace a cam?
Author
Discussion

wilfandrowlf

Original Poster:

603 posts

243 months

Friday 1st October 2010
quotequote all
Hi

I am looking to get a Chim very shortly but the car in question has a worn out cam (rattly when warmed up, lacking any real grunt). How much as a ball park figure do you think it will cost to swap out. RPi Engineering tell me it's approx £370.00 for the kit (Piper). I have thought about doing it myself and would I be right in thinking I just need a Range Rover (Haynes) manual to find out how?

Any tips/hints gratefully received......

SILICONE KID

14,997 posts

262 months

Friday 1st October 2010
quotequote all
Piper is a bit old hat,Things have moved on so i would go for the MC1 or stealth..
I would have a word with V8D or TVR power.

Pupp

13,043 posts

303 months

Friday 1st October 2010
quotequote all
SILICONE KID said:
Piper is a bit old hat
Really? Must take mine out and chuck it laugh

Pacman1972

327 posts

293 months

Friday 1st October 2010
quotequote all
I bought mine about a month ago and soon found out it needed a new cam.
Originally quoted £2500yikes, but thanks to this forum I was quickly brought back into the real world.

Just had mine done and am picking it up tomorrow - Cost just under £1000 which all thing considered I felt was reasonable - Considered doing it myself but simply didnt have the time right now.

Be interested to know how you get on.

ray_von

3,066 posts

283 months

Saturday 2nd October 2010
quotequote all
SILICONE KID said:
Piper is a bit old hat,Things have moved on so i would go for the MC1 or stealth..
I would have a word with V8D or TVR power.
Do Piper not make both of these, they certainly do the stealth. Things have moved on though, I was charged 10 hrs labour to do my cam, now apparently it takes only 6hrs confused

jdl1981

299 posts

214 months

Saturday 2nd October 2010
quotequote all
it cost me just over a grand to have one replaced

Pupp

13,043 posts

303 months

Saturday 2nd October 2010
quotequote all
Yep, Piper produce many of the proprietary cams offered by different tuners. You specify the data for it (base circle dia, lift, duration, timing, no of cyls, firing order, quietening ramp details, lobe width, follower type/material, required hardness and metallurgy, spring pressure, bearing config, and plenty of other variables; they grind it for you and you can then sell it as a 'Daz old hat special' or whatever

Timja

1,955 posts

240 months

Saturday 2nd October 2010
quotequote all
Did these prices include replacing the followers?

SILICONE KID

14,997 posts

262 months

Saturday 2nd October 2010
quotequote all
There is two stealth cams on the market,both completly differentidea

Speedracer329

1,507 posts

208 months

Saturday 2nd October 2010
quotequote all
SILICONE KID said:
There IS two stealth cams on the market,both completly differentidea
Sorry mate but I have to do this.


There ARE.

teacher

Timja

1,955 posts

240 months

Saturday 2nd October 2010
quotequote all
Quinny said:
Timja said:
Did these prices include replacing the followers?
No one would replace a cam, and not the followersnono
I presumed so, but thought it's worth checking.

chimaera1855

334 posts

199 months

Saturday 2nd October 2010
quotequote all
can those cam been use if u plan to get a blower????or u need to get special cam.want to get more power before puting the blower.tks

SILICONE KID

14,997 posts

262 months

Saturday 2nd October 2010
quotequote all

CHIMAERA 1885 Call V8 Developments or TVR power if you have decided to fit A super charger.They will give you advice.You could get the plug and play Megasquirt(no wireing) and add the trigger wheel wireing etc for wasted spark at a later date..It will only need to go on the rollers for a re map.You are very limited with what you have 14CUX.I changed from a 285 cam to a 217 when i had the Eaton 45 charger on my MGB.Some one will explain why!Think its something to do with cam lift duration and overlap.A more mild cam works better with the super charger and a lower compression engine.Engine

Edited by SILICONE KID on Saturday 2nd October 15:49


Edited by SILICONE KID on Saturday 2nd October 15:52

SILICONE KID

14,997 posts

262 months

Saturday 2nd October 2010
quotequote all
Quinny.get back on the pipe and slippers Griff forums.laughand don`t forget the Cravat and smoking jacketnerd

chimaera1855

334 posts

199 months

Saturday 2nd October 2010
quotequote all
tks Daren for ur help.what i meant is can i use this kinda of cam before puting the blower and still get better performance than the original(which i suspect is a bit tired.tks

SILICONE KID

14,997 posts

262 months

Saturday 2nd October 2010
quotequote all
You need to talk to the specialists..

SP6 Animal

6,015 posts

241 months

Saturday 2nd October 2010
quotequote all
SILICONE KID said:
You need to talk to the specialists..
Carry on Daz ears