Black Diamond/cross drilled discs
Black Diamond/cross drilled discs
Author
Discussion

pbaker43

Original Poster:

268 posts

199 months

Thursday 7th October 2010
quotequote all
Hi everyone,
Looking to replace the discs on my 'money pit'. Came across some discs on 'Europerformance.co.uk' has anyone used this site? Has anyone purchased the 'Black Diamond'products... The reason I ask is that driving arounbd the mountains every weekend is wearing the pads and discs and generating some heat.

Thanks
Phil

Sparky99

87 posts

201 months

Thursday 7th October 2010
quotequote all
I had some black diamond cross drilled disk on my 325 sport BM back in about 2000. I ran with EBC green stuff pads.

Them were an improvement over standard once a little bit of heat was built up. No problems or complaints about the product.

Podie

46,649 posts

306 months

Thursday 7th October 2010
quotequote all
Skirting the rules a little here... but I would spend money elsewhere.

Zippee

14,157 posts

265 months

Thursday 7th October 2010
quotequote all
The grooved discs are fine (wouldn't buy the drilled), I ran them on my old Chim and once bedded in they were great. The B/Diamond pads on the other hand I wouldn't touch.

Dave 500

7,889 posts

273 months

Thursday 7th October 2010
quotequote all
Not a TVR I know but



This was after only Two trackdays and probably 1000 road miles frown

I just use normal disks now with decent pads.

pbaker43

Original Poster:

268 posts

199 months

Thursday 7th October 2010
quotequote all
Hi All thanks for the info on the discs,think I will stay with standard and look for some better pads.smile

haircutmike

22,511 posts

235 months

Thursday 7th October 2010
quotequote all
I changed my oversize, (330mm) discs for a cheap set of grooved, drilled discs by EBC.

They were as cheap as chips, around 50 squid at the time.

They have dove about 20 T/D's and about 18K road miles and have hardly any wear at all using Hawk HP Plus pads.