Rear Plugs

[pmessling]

Does any one have any good techniques on how to get the HT leads onto the rear plugs, its impossible.

I changed all the plugs, HT leads and coils today and my miss fire disappeared on the only to return at the other end of the rev's when pulling away. I had a quick look and looks like one of the ht leads has come off the plug but waiting till tomorrow to remove the air boxes again to have a better look to see if it has,

SO any one have a good way to get the lead onto the plug as there isn't much room

Peter

[SimonKD]

You may get better access with a pair of these.

Regards
Simon

http://cgi.ebay.co.uk/SPARKPLUG-SPARK-PLUG-INSULAT...

[Tanguero]

A quick squirt of WD40 inside the plug boot makes the job a whole lot easier.

[pmessling]

right all done, the wd40 didn't work and created a seal so when putting the boot over the plug just pushed back. i had to remove the plug to give it a clean. i did find a bit of spit on the end worked. Although think it was more luck that it went on properly.

thanks for your help

[greenm]

Bit of spit on the end always works???