Griff Pages/ Rob Brookbanks
Griff Pages/ Rob Brookbanks
Author
Discussion

roseytvr

Original Poster:

1,790 posts

207 months

Friday 8th October 2010
quotequote all
Guys

Trying to knock up a tool to remove the bushes in Wishbones etc. Rob has written an article on the Griffith Pages and has attached a picture/details of the tool he knocked up to do it. however I cannot open the picture that simply says "{mosimage".
Can anyone advise on how to access the file or alternatively put me in touch with Rob?
Thanks
Ian

ray von

3,038 posts

281 months

Friday 8th October 2010
quotequote all
Rob tends to change his name try hrg, bliar out, griffalo amongst others or do a search on power steering racks and you may find one of his posts

Simon.b

1,230 posts

311 months

Friday 8th October 2010
quotequote all
This is the one I used earlier this year, worked a treat as it is, though when I get round to it there could be a couple of minor improvments i could make.



Bought a piece of mild steel of e-bay and got a mate with a lathe to turn it up.

You then need 10mm dia High Tensile stud iron with few nuts and washers.

Cheers,

Simon.

LordGrover

34,164 posts

241 months

Friday 8th October 2010
quotequote all
He's currently bliarout.

roseytvr

Original Poster:

1,790 posts

207 months

Friday 8th October 2010
quotequote all
Thanks Guys - have emailed Rob.

Simon - thanks for taking the time to post your drawing but unfortunatey it doest mean a lot to me!! Any pictures of it so I can put the diagram in context, sorry but not the brightest in this area!!

Ian

BliarOut

72,863 posts

268 months

Friday 8th October 2010
quotequote all
Trust me, that's better than my drawing hehe Mine was a fraction beefier but I like things over engineered biggrin

Here's the original fag packet sketch...



And it deployed smash





The important things are to use very high tensile nuts and threaded bar (can't remember if I had 8 or 10 grade, the higher the better) and to keep everything clean and greased.

cinquecento

558 posts

254 months

Friday 8th October 2010
quotequote all
I used a combination of sockets and some high tensile threaded rod...

Johno

8,593 posts

311 months

BliarOut

72,863 posts

268 months

Friday 8th October 2010
quotequote all
Thanks to the title I'm the top Google entry for my name now biggrin

Ballistic Banana

14,706 posts

296 months

Monday 11th October 2010
quotequote all
Sorry guys, I'm having trouble moving stuff over from the old site due to that being hacked , can't even get the old name to point at the newer one at the moment.. So all I got online at the mo is here www.tvrgriffith.com . Hopefully will get on with it a bit more now the nights are drawing in boxedin

BB