Windscreens
Author
Discussion

teamHOLDENracing

Original Poster:

5,105 posts

296 months

Wednesday 13th October 2010
quotequote all
Chaps - are the Tamora, T350 and Sagaris windscreens all the same?

After working with a team at the Britcar 24 hour race this year I am rapidly coming to the conclusion that a glass screen is the way ahead for endurance racing. I am using coated polycarbonate at the moment but the curvature of the screen eventually leads to cracking (quite quickly after a bit of brake fluid blows on the screen), right in the line of sight, and use of the wiper for a prolonged period will cause scratching despite the anti scratch coating.

The bodyshell is a Sagaris prototype, which may cause some issues, but I guess a screen suitable for a Sagaris road car is the best starting point.

So would a T car screen also fit a Sagaris? Has anyone ever come across a heated option?

Thanks

Andy

TVRMARK500

2,312 posts

208 months

Wednesday 13th October 2010
quotequote all
I'm getting a new windscreen for mine, no cracks just water ingress around the edges of old one, your welcome to try my old one to see if it fits before buying a new one.

Edited by TVRMARK500 on Wednesday 13th October 17:33

teamHOLDENracing

Original Poster:

5,105 posts

296 months

Wednesday 13th October 2010
quotequote all
That would be great Mark. Where are you based?

SP6 Animal

6,015 posts

239 months

Wednesday 13th October 2010
quotequote all
TVRMARK500 said:
I'm getting a new windscreen for mine, no cracks just water ingress around the edges of old one, your welcome to try my old one to see if it fits before buying a new one.

Edited by TVRMARK500 on Wednesday 13th October 17:33
Not a chance of getting that out whole.

Barry Ashcroft

1,958 posts

250 months

Wednesday 13th October 2010
quotequote all
Mine came out of the Tam in one piece when I had it changed.

TVRMARK500

2,312 posts

208 months

Wednesday 13th October 2010
quotequote all
teamHOLDENracing said:
That would be great Mark. Where are you based?
YHM

brogenville

941 posts

230 months

Wednesday 13th October 2010
quotequote all

Using the modern wire cutting tool (as opposed to tyhe old type that hacked along the edge of the windscreen) it shouldn't be a problem at all. Definetly question any windscreen fitter that can manage that.

Glassman

24,951 posts

244 months

Wednesday 20th October 2010
quotequote all
The early T350 (up to 2003) uses the same screen as the Tamora. 2003/on is the same as the Sagaris.

544mm top to bottom in the middle = early version; 540mm = late.


teamHOLDENracing

Original Poster:

5,105 posts

296 months

Wednesday 20th October 2010
quotequote all
Glassman said:
The early T350 (up to 2003) uses the same screen as the Tamora. 2003/on is the same as the Sagaris.

544mm top to bottom in the middle = early version; 540mm = late.
Thanks, that's very helpful - I'll check the dimensions on my shell

Glassman

24,951 posts

244 months

Wednesday 20th October 2010
quotequote all
If the glass has a trim top/bottom, remember to make an allowance for this; you can sometimes expose the glass edge by gently pushing the trim back with an old credit card.

teamHOLDENracing

Original Poster:

5,105 posts

296 months

Wednesday 20th October 2010
quotequote all
My car has a polycarbonate screen currently, cut from a flat sheet using a custom template and bolted in place. The aperture size is therefore very easy - no trim anywhere!

Glassman

24,951 posts

244 months

Wednesday 20th October 2010
quotequote all
The dimensions are for the glass - aperture size will be different