Winter odd-jpb plans......
Discussion
Clocks are a changin'....
Fewer evenings to go for a blatt after a hard 9-5 slog...
Less weekends for a leisurley drive with SWMBO....
All that 'spare' time....
I intend to clean up all the earthing points...
Rocker cover gasket change (noticed a little oil seeping out)
Interior - dash and perhaps carpets....
So what are you planning in the cold winter evenings and weekends to come?
Nosh
Fewer evenings to go for a blatt after a hard 9-5 slog...
Less weekends for a leisurley drive with SWMBO....
All that 'spare' time....
I intend to clean up all the earthing points...
Rocker cover gasket change (noticed a little oil seeping out)
Interior - dash and perhaps carpets....
So what are you planning in the cold winter evenings and weekends to come?
Nosh
Hmmm odd jobs eh?
Well I've got a few bits and bobs to take care of...
- Replace rear wheel bearing
- Sort out a weeping power steering hose
- Fix the rattley passenger window once and for all
- Replace the knackered speedo LED which went yesterday
- Respray
- Finally fit the mk3 lights which have been sitting attached to the car with nothing but the headlight wires for A YEAR
- Replace the window seals and hoop seal
- Fit a MAP sensor to my ECU and have it remapped
Then the small matter of wiring up and putting an engine in the Tuscan racer and making that move under its own steam along with a million other little things it needs... Its going to be a long winter!
Well I've got a few bits and bobs to take care of...
- Replace rear wheel bearing
- Sort out a weeping power steering hose
- Fix the rattley passenger window once and for all
- Replace the knackered speedo LED which went yesterday
- Respray
- Finally fit the mk3 lights which have been sitting attached to the car with nothing but the headlight wires for A YEAR
- Replace the window seals and hoop seal
- Fit a MAP sensor to my ECU and have it remapped
Then the small matter of wiring up and putting an engine in the Tuscan racer and making that move under its own steam along with a million other little things it needs... Its going to be a long winter!
hiltonig said:
Ahh 450nick, do you have a pic of the heat shields around the supercharger and dump valve ?, i have the S/C kit fitted with the ACT manifolds as per yours and need to see what you have done with regards to heat shielding.
Hi NigelI don't have a pic on me at the moment but I can try and get one over the weekend when I'm at home. IIRC, the offside side around the recirc valve wasn't a problem at all and it all fits as standard. The nearside with the modified SC manifold was a bit more of a challenge and I had to cut a square-ish section out of the top of the heat sheild at the very end (nearest the bonnet) as the bend kicks up too early and hits the sheild. It still protects the charger etc no problem, but the top stops shorter than normal (the side bit continues to sheild the intake pipe as much as possible).
I then had to slightly bend the mounting bit up to lift the whole sheild up by 1-2 mm to get a little more clearance over the manifold than normal, and I think there may have been a small amount of bending to clear the manifold ports. It sounds like a lot but it wasn't really. I just cut the top out to clear the major difference and the rest was done with a long screwdriver as and when I detected a buzz from the sheild!
tvr-
rear wheel bearing (got ready to go)
engine mounts (got ready to go)
manifold gaskets (got ready to go)
rocker cover gaskets (got ready to go)
find the weird whistling from the plenum area
find the annoying knocking from the rear!!!!
full geometry
Mini-
build chassis
attach body to chassis
mount engine + gearbox
mount bonnet/wing thing
build front suspension
prep for IVA test
re-thing things after failing IVA
give in and go to the pub.
rear wheel bearing (got ready to go)
engine mounts (got ready to go)
manifold gaskets (got ready to go)
rocker cover gaskets (got ready to go)
find the weird whistling from the plenum area
find the annoying knocking from the rear!!!!
full geometry
Mini-
build chassis
attach body to chassis
mount engine + gearbox
mount bonnet/wing thing
build front suspension
prep for IVA test
re-thing things after failing IVA
give in and go to the pub.
I've started already!
Car on axle stands awaiting delivery of rebuilt diff and rack tomorrow.
Recarpet interior.
Bit of reupholtery works.
Sell road wheels and tyres, (gonna run on wider, "Image" track wheels and tyres all the time).
Change Pro-Tech dampers for something a little more hardcore.
Do away with mesh grill but fit another mesh grill deeper in front of oil cooler and rad for protection.
Car on axle stands awaiting delivery of rebuilt diff and rack tomorrow.
Recarpet interior.
Bit of reupholtery works.
Sell road wheels and tyres, (gonna run on wider, "Image" track wheels and tyres all the time).
Change Pro-Tech dampers for something a little more hardcore.
Do away with mesh grill but fit another mesh grill deeper in front of oil cooler and rad for protection.
Winter odd-jobs? Hah! Since I got mine two months ago it's been a non-stop project
and I'm resigned to it taking me through to Easter...........
currently looking like this:

It's been a steep learning curve so far and, whilst I'm enjoying it overall, some of the workmanship I've come across (rear of the dashboard springs to mind
) has been a real eye-opener......................
R
and I'm resigned to it taking me through to Easter...........currently looking like this:

It's been a steep learning curve so far and, whilst I'm enjoying it overall, some of the workmanship I've come across (rear of the dashboard springs to mind
) has been a real eye-opener...................... R
hiltonig said:
I would love to ask how to get the dash top off as my speedo bulb has gone
you need the fingers of a ninja and the knuckles of iron man. and you need to be a contortionist.do a search! not "easy" but not hard.
i took mine off and tbh havent bothered to re-attach properly
darkcat said:
hiltonig said:
I would love to ask how to get the dash top off as my speedo bulb has gone
you need the fingers of a ninja and the knuckles of iron man. and you need to be a contortionist.do a search! not "easy" but not hard.
i took mine off and tbh havent bothered to re-attach properly
ks...! Sit in the right position and you can have it off in 3 minutes with unscathed hands (same as the door cards). 
hiltonig said:
I would love to ask how to get the dash top off as my speedo bulb has gone
Nigel.Remove elasticated handbook holder flap.
Look up into void, remove 10mm bolt that is looking upwards.
You can then lift the dash top up about 10" and get to most things.
If you want to remove the whole top, there is a bolt on the drivers side in a similar position.
A swan's neck and a 10mm ratchet spanner make work easy!
P.
haircutmike said:
hiltonig said:
I would love to ask how to get the dash top off as my speedo bulb has gone
Nigel.Remove elasticated handbook holder flap.
Look up into void, remove 10mm bolt that is looking upwards.
You can then lift the dash top up about 10" and get to most things.
If you want to remove the whole top, there is a bolt on the drivers side in a similar position.
A swan's neck and a 10mm ratchet spanner make work easy!
P.
Gassing Station | Chimaera | Top of Page | What's New | My Stuff





