Won't start after long lay up
Won't start after long lay up
Author
Discussion

redkarla

Original Poster:

77 posts

225 months

Thursday 14th October 2010
quotequote all
Hi

I have had the Chimera in the garage for the past 6 months (new baby & needs new clutch). haven't started for 2 months !!!! so tried at the weekend and the battery was dead (expected that as my garage is away from my house with no power so can't trickle charge).

Think I know what it is as I can't hear the fuel pump prime!!!! so think it's the immobiliser. I suppose when I get time this weekend should try fuses and to see if I'm getting fuel & sprake?

Any quick fix idea's? and if it is immobiliser what's my next step.

Thanks

Dave 500

7,889 posts

273 months

Thursday 14th October 2010
quotequote all
The immobiliser should cut three things.

1 Starter
2 Fuel Pump
3 ECU feed I think.

Each one can easily be tested by using something like this

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&am...

The early immobilisers are known to have sticky relays which normally effect the starter.

Carl Barker replaced mine http://www.tvruk.tv/index.cfm

Edited by Dave 500 on Thursday 14th October 14:23

redkarla

Original Poster:

77 posts

225 months

Thursday 14th October 2010
quotequote all
She turns over just won't catch which makes me think it's the immobilizer as I can't hear the fuel pump.

Ta so far

Dave 500

7,889 posts

273 months

Thursday 14th October 2010
quotequote all
Run a 12V feed straight to the fuel pump its next to the rear passenger wheel.

Dave 500

7,889 posts

273 months

Thursday 14th October 2010
quotequote all
The other thing to check would be the fuel cut off which is above the glove pouch thing.

Long shot I know but its worth a look.

SMB

1,523 posts

297 months

Thursday 14th October 2010
quotequote all
redkarla said:
She turns over just won't catch which makes me think it's the immobilizer as I can't hear the fuel pump.

Ta so far
Probably one of the silver relays in the footwell next to the ecu loom. Swap them out and retry or bridge the contacts. Both need to work to fire up.

redkarla

Original Poster:

77 posts

225 months

Friday 15th October 2010
quotequote all
Ta guys gonna get onto that at the weekend - will let you know.