Mk 3 polo: Changing R13 wheels to R15?
Discussion
Hi all,
My Mk3 polo has currently got R13 wheels with 165/70 tyres. I am looking at changing the wheels to R15 with 165/50 or 165/45 tyres. Couple of questions regarding this
Will the PCD be 100mm?
What will the offset be i.e. 35?
What width/ profile of tyre will actually be required if I went for a set of R15 alloys, but Im guessing the width will vary depending on the alloy bought?
Cheers for your help
MMA4life
My Mk3 polo has currently got R13 wheels with 165/70 tyres. I am looking at changing the wheels to R15 with 165/50 or 165/45 tyres. Couple of questions regarding this

Will the PCD be 100mm?
What will the offset be i.e. 35?
What width/ profile of tyre will actually be required if I went for a set of R15 alloys, but Im guessing the width will vary depending on the alloy bought?
Cheers for your help
MMA4life
Hi,
can you clarify what type of polo you have, is it a 1994 onwards with the 6n chassis code or is it pre 1993 2F chassis? Has the car been lowered are or you intending to lower it?
On the later polos it is possible to fit 15s up to 7 or 7.5J depending on the offset and amount lowered before you have to start cutting and folding metal. A 60mm drop on 15s is quite a balance between looks and drivability.
On the earlier polos you will have problems with 15s up to 7J especially if lowered, the back arches especially will need to be trimmed or rolled back.
Oh and if you end up with 7J wide wheels dont go with 165 wide tyres, its gay as the tyre is over half an inch narrower, 195/45 is far better an will offer some rim protection.
Look on Polo3.co.uk for more info
dave
can you clarify what type of polo you have, is it a 1994 onwards with the 6n chassis code or is it pre 1993 2F chassis? Has the car been lowered are or you intending to lower it?
On the later polos it is possible to fit 15s up to 7 or 7.5J depending on the offset and amount lowered before you have to start cutting and folding metal. A 60mm drop on 15s is quite a balance between looks and drivability.
On the earlier polos you will have problems with 15s up to 7J especially if lowered, the back arches especially will need to be trimmed or rolled back.
Oh and if you end up with 7J wide wheels dont go with 165 wide tyres, its gay as the tyre is over half an inch narrower, 195/45 is far better an will offer some rim protection.
Look on Polo3.co.uk for more info
dave
aka_kerrly said:
Hi,
can you clarify what type of polo you have, is it a 1994 onwards with the 6n chassis code or is it pre 1993 2F chassis? Has the car been lowered are or you intending to lower it?
On the later polos it is possible to fit 15s up to 7 or 7.5J depending on the offset and amount lowered before you have to start cutting and folding metal. A 60mm drop on 15s is quite a balance between looks and drivability.
On the earlier polos you will have problems with 15s up to 7J especially if lowered, the back arches especially will need to be trimmed or rolled back.
Oh and if you end up with 7J wide wheels dont go with 165 wide tyres, its gay as the tyre is over half an inch narrower, 195/45 is far better an will offer some rim protection.
Look on Polo3.co.uk for more info
dave
Hey, its a 1995 1.6 cl 6N. I believe the offset is between 35-45 as stated on specifications from the internet can you clarify what type of polo you have, is it a 1994 onwards with the 6n chassis code or is it pre 1993 2F chassis? Has the car been lowered are or you intending to lower it?
On the later polos it is possible to fit 15s up to 7 or 7.5J depending on the offset and amount lowered before you have to start cutting and folding metal. A 60mm drop on 15s is quite a balance between looks and drivability.
On the earlier polos you will have problems with 15s up to 7J especially if lowered, the back arches especially will need to be trimmed or rolled back.
Oh and if you end up with 7J wide wheels dont go with 165 wide tyres, its gay as the tyre is over half an inch narrower, 195/45 is far better an will offer some rim protection.
Look on Polo3.co.uk for more info
dave
. Nope, hasnt been lowered. Not reaaly intending to atm.Cheers for the help. Will have a look at the options

I have been recommended these tyres to get for the polo:-
http://www.camskill.co.uk/products.php?plid=m53b0s...
Whats your opinions on these?
Just got to find some decent enough alloys now
http://www.camskill.co.uk/products.php?plid=m53b0s...
Whats your opinions on these?
Just got to find some decent enough alloys now

MMA4life said:
Hi all,
My Mk3 polo has currently got R13 wheels with 165/70 tyres. I am looking at changing the wheels to R15 with 165/50 or 165/45 tyres. Couple of questions regarding this
Will the PCD be 100mm?
What will the offset be i.e. 35?
What width/ profile of tyre will actually be required if I went for a set of R15 alloys, but Im guessing the width will vary depending on the alloy bought?
Cheers for your help
MMA4life
165/50 and 165/45 tyres don't exist!My Mk3 polo has currently got R13 wheels with 165/70 tyres. I am looking at changing the wheels to R15 with 165/50 or 165/45 tyres. Couple of questions regarding this

Will the PCD be 100mm?
What will the offset be i.e. 35?
What width/ profile of tyre will actually be required if I went for a set of R15 alloys, but Im guessing the width will vary depending on the alloy bought?
Cheers for your help
MMA4life
Cost Captain said:
MMA4life said:
Hi all,
My Mk3 polo has currently got R13 wheels with 165/70 tyres. I am looking at changing the wheels to R15 with 165/50 or 165/45 tyres. Couple of questions regarding this
Will the PCD be 100mm?
What will the offset be i.e. 35?
What width/ profile of tyre will actually be required if I went for a set of R15 alloys, but Im guessing the width will vary depending on the alloy bought?
Cheers for your help
MMA4life
165/50 and 165/45 tyres don't exist!My Mk3 polo has currently got R13 wheels with 165/70 tyres. I am looking at changing the wheels to R15 with 165/50 or 165/45 tyres. Couple of questions regarding this

Will the PCD be 100mm?
What will the offset be i.e. 35?
What width/ profile of tyre will actually be required if I went for a set of R15 alloys, but Im guessing the width will vary depending on the alloy bought?
Cheers for your help
MMA4life
Gassing Station | Audi, Seat, Skoda & VW | Top of Page | What's New | My Stuff


